Influence of Outer Diameter of Electrode's Nozzle on Oxidation of NO by Corona Discharge

WEI En-zong,GAO Xiang,LUO Zhong-yang,WU Zu-liang,NI Ming-jiang,CEN Ke-fa
DOI: https://doi.org/10.3969/j.issn.1674-7607.2005.02.028
2005-01-01
Abstract:With moist air as the radical source, the influence of nozzle electrode's OD on both corona discharge and NO oxidation have been studied. Test results show that the corona's onset and breakdown voltage both rise with increasing OD of the nozzle. With the same power of discharge, the bigger the nozzle's OD, the higher the NO oxidation rate. However, in the low power range (below 4.5W under present testing conditions), variations are small, while under high power conditions, variations become obvious due to change of mode of discharge. Under test conditions, the marimal oxidation rate of NO can respectively reach 65.3%, 55% and 20.5% for nozzles of OD 3,2 and 0.9mm. With larger sized nozzles, the energy utilization efficiency of NO corona oxidation rises. In the effective working area, with discharge electrodes of sizes 3 and 2mm, the respective energy utilization efficiency of NO oxidation gets up to 53g/kWh and 44g/kWh, with a corresponding NO oxidation rate of 53.8% and 50.5%. Figs 8 and refs 9.
What problem does this paper attempt to address?