Abstract:In this work, a coaxial dielectric barrier discharge reactor has been developed for the decomposition of CO2 at atmospheric pressure. The response surface methodology based on a three-factor, three-level Box-Behnken design has been developed to investigate the effects of key independent process parameters (discharge power, feed flow rate, and discharge length) and their interactions on the reaction performance in terms of CO2 conversion and the energy efficiency of the plasma process. Two quadratic polynomial regression models have been established to understand the relationships between the plasma process parameters and the performance of the CO2 conversion process. The results indicate that the discharge power is the most important factor affecting CO2 conversion, while the feed flow rate has the most significant impact on the energy efficiency of the process. The interactions between different plasma process parameters have a very weak effect on the conversion of CO2. However, the interactions of the discharge length with either discharge power or gas flow rate have a significant effect on the energy efficiency of the plasma process. The optimal process performance-CO2 conversion (14.3%) and energy efficiency (8.0%) for the plasma CO2 conversion process is achieved at a discharge power of 15.8 W, a feed flow rate of 41.9 ml.min(-1) and a discharge length of 150 mm as the highest global desirability of 0.816 is obtained at these conditions. The reproducibility of the experimental results successfully demonstrates the feasibility and reliability of the design of experiments approach for the optimization of the plasma CO2 conversion process.

Influence of Discharge Reactor Design on the NO Removal Rate with Dielectric Barrier Discharges

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Influence of the Position of the Dielectric Layer on the NO Removal Effect with a Discharge Non-thermal Plasma

The Exprimental Research of NO Removal with the Dielectric Barrier Discharge Non-Thermal Plasma

Comparative Study Between Single- and Double-Dielectric Barrier Discharge Reactor for Nitric Oxide Removal

Effects of Electrode Structure and Electron Energy on Abatement of NO in Dielectric Barrier Discharge Reactor

Streamer Corona Plasmas and the Chemical Effects on NO Removal

Nitrogen Oxides Removal and Mechanism Research for Dielectric Barrier Discharge with NaCl Solution Grounded Electrode

Dual-course dielectric barrier discharge with a novel hollow micro-holes electrode to efficiently mitigate NO x

Optimization for Plasma-facilitated Catalytic Reduction of NO_x

Impact of the geometric structure parameter on the performance of dielectric barrier reactor for toluene removal

Investigation Of Factors Influencing Nox Remediation By High Frequency Dielectric Barrier Discharge Plasma

Effect of packed quartz pellets on DBD plasma treating with NO

Dual-course Dielectric Barrier Discharge with a Novel Hollow Micro-Holes Electrode to Efficiently Mitigate NOx

Optimization of CO2 Conversion in a Cylindrical Dielectric Barrier Discharge Reactor Using Design of Experiments

NOx removal by non-thermal plasma reduction: experimental and theoretical investigations

The effects of inner electrode shape on the performance of dielectric barrier discharge reactor for oxidative removal of NO and SO2

Effect of Packed Sphere on Removal of NOx by Coaxial Plasma Reactor

Scale-up Experiment of Plasma Reactors with Different Electrode Structure

Reducing energy consumption in plasma NO conversion utilizing plasma aerodynamic effect

Numerical Study of the Influence of Dielectric Tube on Propagation of Atmospheric Pressure Plasma Jet Based on Coplanar Dielectric Barrier Discharge