Abstract:An in situ electron-induced deNOx process with CNT activated by DBD was achieved. • Carbon atoms on CNT surface were verified to be excited by plasma in DBD-CNT system. • Reactions between NOx and excited C result in synergistic effect of DBD-CNT system. In this study, a new in situ electron-induced process is presented with carbon nanotubes (CNTs) as a reduction agent activated by dielectric barrier discharge (DBD) for nitrogen oxide (NOx) abatement at low temperature (<407 K). Compared with a single DBD system and a DBD system with activated carbon (DBD-AC), a DBD system with carbon nanotubes (DBD-CNT) showed a significant promotion of NOx removal efficiency and N2 selectivity. Although the O2 content was 10%, the NOx conversion and N2 selectivity in the DBD-CNT system still reached 64.9% and 81.9% at a specific input energy (SIE) of 1424 J/L, and these values decreased to 16.8%, 31.9% and 43.2%, 62.3% in the single DBD system and the DBD-AC system, respectively. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were utilized to investigate surface changes in the CNTs after activation by DBD to explore the NOx reduction abatement mechanism of this new process. Furthermore, the outlet gas components were also observed via Fourier transform infrared spectroscopy (FTIR) to help reveal the NOx reduction mechanism. Experimental results verified that carbon atoms excited by DBD and the structure of CNTs contributed to the synergistic activity of the DBD-CNT system. The new deNOx process was accomplished through in situ heterogenetic reduction reactions between the NOx and carbon atoms activated by the plasma on the CNTs. In addition, further results indicated that the new deNOx process exhibited acceptable SO2 tolerance and water resistance.

Dual-course dielectric barrier discharge with a novel hollow micro-holes electrode to efficiently mitigate NO x

Dual-course Dielectric Barrier Discharge with a Novel Hollow Micro-Holes Electrode to Efficiently Mitigate NOx

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Effect of packed quartz pellets on DBD plasma treating with NO

Optimization for Plasma-facilitated Catalytic Reduction of NO_x

Nitrogen Oxides Removal and Mechanism Research for Dielectric Barrier Discharge with NaCl Solution Grounded Electrode

Effects of Electrode Structure and Electron Energy on Abatement of NO in Dielectric Barrier Discharge Reactor

NOx removal by non-thermal plasma reduction: experimental and theoretical investigations

The effects of inner electrode shape on the performance of dielectric barrier discharge reactor for oxidative removal of NO and SO2

Streamer Corona Plasmas and the Chemical Effects on NO Removal

Reducing energy consumption in plasma NO conversion utilizing plasma aerodynamic effect

Synergy Study for Plasma-Facilitated Catalytic Reduction of NOx

Influence of the Position of the Dielectric Layer on the NO Removal Effect with a Discharge Non-thermal Plasma

The Exprimental Research of NO Removal with the Dielectric Barrier Discharge Non-Thermal Plasma

Influence of Discharge Reactor Design on the NO Removal Rate with Dielectric Barrier Discharges

High efficiency NO x synthesis and regulation using dielectric barrier discharge in the needle array packed bed reactor

Removal of NO by Carbon-Based Catalytic Reduction Bed Loaded with Mn Induced by Dielectric Barrier Discharge at Low Temperature

In Situ Electron-Induced Reduction of NO X Via CNTs Activated by DBD at Low Temperature

Dielectric-Boosted Gliding Arc Discharge for N2 Fixation into NOx

Improving the energy efficiency of surface dielectric barrier discharge devices for plasma nitric oxide conversion utilizing active flow control

Characteristics of emissive spectrum and the removal of nitric oxide in N2/02/NO plasma with argon additive