Dielectric-Boosted Gliding Arc Discharge for N2 Fixation into NOx

DOI: https://doi.org/10.1007/s11090-024-10474-8
2024-05-14
Plasma Chemistry and Plasma Processing
Abstract:Plasma nitrogen fixation technology is of great significance in solving the problem of nitrogen fertilizer resource shortage, saving energy and reducing carbon emission, promoting sustainable development of agriculture and promoting resource recycling. To enhance the efficiency and treatment capacity of the two-dimensional, blade-type gliding arc nitrogen fixation reaction, a dielectric-boosted gliding arc discharge reactor with a 50-mm-diameter quartz dielectric (DBGAD Φ 50 ) was used to conduct N 2 fixation into NO x . The impact of reactor parameters and gas parameters on the nitrogen fixation reaction was systematically investigated in this study. The findings revealed that the DBGAD Φ 50 significantly improved the nitrogen fixation effect. At a specific input energy of 2.7 kJ/L, the concentration of NO x generated by the dielectric-boosted gliding arc air discharge was 1.12 times that of the conventional gliding arc discharge (GAD). By utilizing the DBGAD Φ 50 reactor, the energy efficiency of 6.83 g/kW h was achieved at a gas flow rate of 5.6 L/min. Appropriately increasing O 2 concentration favors the production of NO x . In the DBGAD Φ 50 , the NO x concentration was 1.33 times higher than that in the air atmosphere when the added O 2 volume fraction reached 30%. Performance can be further enhanced by adding TiO 2 catalyst particles to the surface of the quartz dielectric to form a catalyst layer approximately 5 mm thick. At an O 2 concentration of 30%, the DBGAD Φ 50 reactor loaded with TiO 2 increased NO x concentration by 26% and energy efficiency by 49%, respectively, resulting in an efficiency of 14.9 g/kW h compared to the case without catalyst.
engineering, chemical,physics, applied, fluids & plasmas
What problem does this paper attempt to address?