Abstract:Plasma-based NOx production is of interest for sustainable N2 fixation, but more research is needed to improve its performance. One of the current limitations is recombination of NO back into N2 and O2 molecules immediately after the plasma reactor. Therefore, we developed a novel so-called “effusion nozzle”, to improve the performance of a rotating gliding arc plasma reactor for NOx production, but the same principle can also be applied to other plasma types. Experiments in a wide range of applied power, gas flow rates and N2/O2 ratios demonstrate an enhancement in NOx concentration by about 8%, and a reduction in energy cost by 22.5%. In absolute terms, we obtain NOx concentrations up to 5.9%, at an energy cost down to 2.1 MJ/mol, which are the best values reported to date in literature. In addition, we developed five complementary models to describe the gas flow and plasma behavior, including arc dynamics and plasma chemistry, aiming to reveal why the effusion nozzle yields better performance. Our simulations reveal that the effusion nozzle acts as very efficient heat sink, causing a fast drop in gas temperature when the gas molecules leave the plasma, hence limiting the recombination of NO back into N2 and O2 . This yields an overall higher NOx concentration than without the effusion nozzle. In addition, this higher NOx concentration can be obtained at a slightly lower power, because the effusion nozzle allows for the ignition and sustainment of the plasma at somewhat lower power. Hence, this also explains the lower energy cost. Overall, our experimental results and detailed modeling analysis will be useful to improve plasmabased NOx production in other plasma reactors as well.

Improving the energy yield of plasma-based NOX synthesis with in situ adsorption

Optimization for Plasma-facilitated Catalytic Reduction of NO_x

Oxidation and Reduction Processes During NO X Removal with Corona-Induced Nonthermal Plasma

Effusion Nozzle for Energy-Efficient Nox Production in a Rotating Gliding Arc Plasma Reactor

Synergy Study for Plasma-Facilitated Catalytic Reduction of NOx

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Reducing energy consumption in plasma NO conversion utilizing plasma aerodynamic effect

Dielectric-Boosted Gliding Arc Discharge for N2 Fixation into NOx

NO formation by N2/O2 plasma catalysis: The impact of surface reactions, gas-phase reactions, and mass transport

High-efficiency Removal of NOx Using a Combined Adsorption-Discharge Plasma Catalytic Process.

High efficiency NO x synthesis and regulation using dielectric barrier discharge in the needle array packed bed reactor

Plasma-Assisted Catalytic Oxidation for Nitrogen Oxides Abatement

Understanding non-equilibrium N 2 O / NO x chemistry in plasma-assisted low-temperature NH 3 oxidation

Effect of thermal gas quenching on NOx production by atmospheric pressure rotating arc Plasma: A pathway towards Eco-Friendly fertilizer

Energy-Efficient Small-Scale Ammonia Synthesis Process with Plasma-Enabled Nitrogen Oxidation and Catalytic Reduction of Adsorbed NOx

Carbon Dioxide Mixed Air Promoting Plasma-Driven Nitrogen Oxidation Conversion

Numbering up and sizing up gliding arc reactors to enhance the plasma-based synthesis of NO x

NOx removal by non-thermal plasma reduction: experimental and theoretical investigations

Efficient ammonia synthesis from the air using tandem non-thermal plasma and electrocatalysis at ambient conditions

Nitrogen fixation by rotational gliding arc plasma at surrounding conditions

Synergy study for plasma-facilitated C2H4 selective catalytic reduction of NOx over Ag/γ-Al2O3 catalyst