Abstract:For nozzle-to-plate electrodes with a gap distance of 43mm, onset streamer occurs with a length of about 1.0-1.5cm when the applied voltage is increased to above the onset voltage Vc. Depending on gaseous compositions, onset streamer may become full streamer to cross the electrodes gap or transfer to the Hermstein glow with increasing the applied voltage. After streamer (peak current_??_60mA) bridging the gap, a long duration Townsend like glow discharge may be also formed, which may lead the spark breakdown. Bridging electrodes gap by streamer does not necessarily lead to spark breakdown. However, spark breakdown occurs only after streamer bridging the gap and a streamer channel, or Townsend like glow discharge, is formed between the nozzle and the plate. Moreover, spark breakdown occurs after a significant increase of the repetition rate of the self-sustained streamers. Depending on the average glow current, the time delay from streamer bridging the electrodes gap to spark breakdown ranges from 0.5 μs to 25 μs within test conditions. With regard to the attachment stability inside streamer channel, a simplified criterion for streamer-glow-spark transition is also discussed in this paper. Theoretical estimations of the time delay are in good agreement with the experiments.

Streamer Corona Plasmas and the Chemical Effects on NO Removal

Streamer Corona Plasmas and NO Removal

Oxidation and Reduction Processes During NO X Removal with Corona-Induced Nonthermal Plasma

Control of Flow Stabilized Positive Corona Discharge Modes and NO Removal Characteristics in Dry Air by C02 Injections

From Chemical Kinetics to Streamer Corona Reactor and Voltage Pulse Generator

NO Removal Characteristics of a Corona Radical Shower System under DC and AC/DC Superimposed Operations

Corona induced non-thermal plasmas: Fundamental study and industrial applications

Streamer-Glow-Spark Transition in a Corona Radical Shower System During NOx Removal Operation

AC/DC Power Modulation for Corona Plasma Generation

Comparison of Two-Type Corona Plasma Energization Techniques: Ultra-Short and DC/AC Power Sources

Corona Plasmas: Fundamental Studies and Industrial Applications

Evaluation of Corona Plasma Techniques for Industrial Applications: HPPS and DC/AC Systems

Streamer Corona Plasma for Fuel Gas Cleaning: Comparison of Energization Techniques

A Pilot Investigation on Oxidation of Ammonium Sulfite by Streamer Corona Plasma

Elements of Pulsed Corona Induced Non-Thermal Plasmas for Pollution Control and Sustainable Development

An Industrial Streamer Corona Plasma System for Gas Cleaning

Corona-induced Non-Thermal Plasma for Gas Cleaning

Recent Advances of Power Conditions for Streamer Corona Plasma Applications

Streamer Plasma Induced Ammonia Flue Gas Desulfurization

Experimental Study of NO2 Reduction in N2/Ar and O2/Ar Mixtures by Pulsed Corona Discharge.

THE HIGH VOLTAGE PULSED CORONA APPROACH FOR THE TREATMENT OF NOx