Abstract:For pulsed corona plasma applications, it becomes important to develop pilot systems with large average power and high-energy conversion efficiency. Since the beginning of 2000, we have been working on an industrial corona plasma system with tasks of 10-30 kW in average power and higher than 90% of total energy conversion efficiency. The pulsed-power source should have the following specifications: rise time of 10-25 ns, pulsewidth of 50-150 ns, pulse repetition rate of up to 1000 pulses per second, peak voltage pulse of 70 kV, peak current of 3.5 kA, dc bias voltage of 10-35 kV, and energy per pulse of up to 30 J. Sixteen parallel wire cylinder reactors are used to match. the source. Gas and reactor temperatures can be controlled individually with water flow around the outside of those cylinders. The system is designed for gaseous oxidation and electrostatic dust precipitation. The system has been used for up to 17 kW in average power. This paper reports the system in detail, discusses issues related to the matching between the source and the reactor, and presents an example of industrial demonstrations on odor abatement at 1000 m(3)/h. Finally, this paper also gives a general guideline for design of corona plasma systems.

Streamer Corona Plasma for Fuel Gas Cleaning: Comparison of Energization Techniques

Chemical Processes in Tar Removal from Biomass Derived Fuel Gas by Pulsed Corona Discharges

High Temperature Pulsed Corona Processing of Fuel Gas

A High-Temperature Pulsed Corona Plasma System for Fuel Gas Cleaning

Tar Removal from Biomass-Derived Fuel Gas by Pulsed Corona Discharges

An Overview of Tar and Dust Removal from Biomass-Derived Syngas by Streamer Corona Discharges

An Industrial Streamer Corona Plasma System for Gas Cleaning

Comparison of Two-Type Corona Plasma Energization Techniques: Ultra-Short and DC/AC Power Sources

Plasma-Catalytical Removal of Tars from Fuel Gas Obtained by Biomass Gasification

Evaluation of Corona Plasma Techniques for Industrial Applications: HPPS and DC/AC Systems

Corona-induced Non-Thermal Plasma for Gas Cleaning

AC/DC Power Modulation for Corona Plasma Generation

From Chemical Kinetics to Streamer Corona Reactor and Voltage Pulse Generator

Streamer Corona Plasmas and the Chemical Effects on NO Removal

A repetitive high-voltage pulse source for pulsed corona treatment of gases

Pulsed Corona Tar Cracker

Corona Plasmas: Fundamental Studies and Industrial Applications

Bridging the Gap for Corona Plasma Applications : from Corona Characteristics, Chemical Kinetics to Pulsed Power Generator and Reactor

Streamer Corona Plasmas and NO Removal

Optimizing Energy Efficiency for Industrial Application of Pulsed Corona Gas Cleaning Techniques

Recent Advances of Power Conditions for Streamer Corona Plasma Applications