Abstract:In order to study the influence of mechanical constraints and thermal state on thermoelastic contact nonlinear problem that between cylinder head and cylinder head gasket, a four-body contact simplified model of cylinder head-cylinder head gasket-engine block-bolts was built based on a four-valve diesel engine.Under different bolt preload and thermal state, contact state and deformation of cylinder head plate were calculated by using Augmented Lagrange multipliers as the contact algorithm.Then the influence of contact stresses and nodal displacements of mechanical constraints on some parts of the cylinder head plate were revealed in rated thermal state condition.Moreover the effect of different thermal state on the results was similarly revealed.The study makes clear that, when preload maintains the rated value and burst pressure is exerted, contact stresses in rated thermal state condition of the parts on cylinder head plate that against the cylinder ring and around the screw, which is on exhaust valve side, are similar with those values in cold state, while nodal displacements are reduced, and in different thermal states, the rates of change among the nodal displacements around the screw and both contact stresses and nodal displacements that against the cylinder ring are all less than 2%;with few exceptions, contact stresses and nodal displacements of these parts of the cylinder head plate increase with the increases of the bolt preload.The results also show that cylinder head gasket sealing tests in normal temperature condition is roughly adequate to practical state.

Application of Contacting Thermal Resistance to Coupled Modeling Finite Element Analysis of Piston Assembly

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Multi-physics Coupling Field Finite Element Analysis on Giant Magnetostrictive Materials Smart Component

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

FEM Based Simulation Study on Static and Dynamic Properties of Port Plate in Axial Piston Pump

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Fully-coupled Thermomechanical Analysis for Sliding Contact Between Textured Slipper and Swashplate in Axial Piston Pump

A multi-time scales semi-decoupled CHT (Coupled Heat Transfer) model and its application on piston transient heat transfer simulation

Finite Element Analysis on Piston of Axial Piston Pump Based on Virtual Prototype

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Study on Thermoelastic Contact of Cylinder Head-Cylinder Head Gasket-Engine Block

Simulation Study on Cyclic Transient Heat Transfer of Piston-cylinder Liner

A Computer Thermal Model of Mixed Lubrication in Point Contacts

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Numerical Study of Coupled Electrical-Thermal-Mechanical-Wear Behavior in Electrical Contacts