Abstract:Ignition delay times of n-butanol/n-heptane mixtures (0%, 20%, 40%, 60% n-butanol in moles) were measured using a rapid compression machine at compressed pressures of 15, 20, and 30 bar, in the compressed temperature range of 650-830 K, and with equivalence ratios of 0.4, 1.0, and 1.5. Sensitivity analysis and reaction fluxes analysis were performed using a detailed mechanism of blend fuels so as to evaluate the impact of n-heptane addition on the ignition and combustion process. Over the experimental conditions in this study, the blend fuels display apparent low and high temperature reactions and a negative-temperature-coefficient (NTC) behavior; with increasing n-butanol mole fraction in the mixtures, the ignition delay times increased; the pressure curves present two-stage heat release behavior at low temperature but one-stage behavior at high temperature. It is worth noting that the n-butanol mole fraction shows negligible effect on the ignition delay times for equivalence ratios of 1.5 at low temperature. Moreover, compressed pressure has a limited effect on the ignition of blend mixture at low temperature but certain influence at medium temperature range. The chemical analysis indicates that n-butanol also presents the NTC behavior because of the low temperature reactivity radicals pool produced by n-heptane. Sensitivity analysis shows that for the pure n-butanol fuel, H-abstraction from the gamma-carbon plays the dominant role in the reactions having the promoting effect on the low-temperature branching, while the major inhibiting reaction is H-abstraction from the a-carbon; for n-butanol/n-heptane mixtures, more reactions play the leading role. The major promoting reactions include some H-abstraction reactions from n-heptane, while the major inhibiting reactions add some elementary reactions of small radicals.

Hydrogen Assisted Catalytic Ignition Characteristics of n-Butane

Characteristics of hydrogen-assisted catalytic ignition of n-butane/air mixtures

Thermal and Chemical Effects of Hydrogen in Catalytic Ignition of N-Butane/air Mixture

Transition Between Thermal and Chemical Effect of Hydrogen Assisted N-Butane Fuel Catalytic Ignition over Pt Catalyst

Experimental study on catalytic ignition ofn-C4H10/H2/air mixtures

Hydrogen-assisted catalytic ignition characteristics of different fuels

Shock-Tube Study of the Autoignition of n-Butane/Hydrogen Mixtures

Effect of Catalyst Length and Hydrogen Addition on the Combustion Characteristics of N-Butane in A Catalytic Swiss-Roll Combustor

Time-resolved CO2 Concentration and Ignition Delay Time Measurements in the Combustion Processes of N-Butane/hydrogen Mixtures

Experimental and Kinetic Study on Ignition Delay Times of Lean N -Butane/hydrogen/argon Mixtures at Elevated Pressures

Interpreting the Effect of Hydrogen Addition on the Auto-Ignition of Branched Alkane: A Case Study of Iso-Butane/hydrogen/o2/ar Mixtures

Comparison of catalytic combustion of methane andn-butane in microtube

Experiment Study on Catalytic Ignition of n-Butane/Air Mixtures in the Micro-reactor

Ignition-delay-time/time-resolved CO2-concentration Measurements During the Combustion of Ic4h10/h2 Mixtures

Autoignition of N-Butanol/n-heptane Blend Fuels in a Rapid Compression Machine under Low-to-Medium Temperature Ranges

Catalytic combustion and kinetic characteristics of n-butanol with Pt/ZSM-5 particles in meso channel

Experimental and Modeling Study of the Auto-Ignition of N-Heptane/N-Butanol Mixtures

Ignition Characteristics of N-Butane/oxygen-enriched Air Mixture in Catalytic Micro-Channel

Effects of Hydrogen Addition on Methane Catalytic Combustion in a Microtube

Experimental investigation of Ar-diluted ethylene catalytic ignition delay times over platinum particles under low temperatures

Experimental study on catalytic ignition