Abstract:In this study, ignition delay times of liquified petroleum gas (LPG)/dimethyl ether (DME) (LPG consists of C3H8 and C4H10 in this work) were measured in a shock tube at different DME blending ratios (0%, 10%, 30%, and 50%), pressures (5, 10, and 15 atm), temperatures (11001500 K), and equivalence ratios (0.5, 1.0, and 1.5). The chemical kinetic mechanism of LPG/DME was established based on Lawrence Livermore National Laboratorys C1C4 chemical kinetic mechanism (Combust. Flame 1998, 114, 192213) and Zhaos DME chemical kinetic mechanism (Int. J. Chem. Kinet. 2008, 40, 118), and its predictions agree well with experimental data. A sensitivity analysis and a reaction pathway analysis were conducted using CHEMKIN-PRO to study the impact of DME addition on the ignition and combustion process. The experimental results show that the ignition delay times of LPG/DME change linearly with increasing DME blending ratios. The sensitivity analysis shows that the number of major promoting reactions for mixtures increases, including H-abstraction and decomposition of CH3OCH3, while the sensitivity factors of the H-abstraction and the decomposition of C3H8 (reactions R115, R120, and R125) decrease with increasing DME blending ratios. The reaction pathway analysis indicates that the H-abstraction reactions play a dominant role, and the contribution rate of OH to H-abstraction increases, while that of H-radical decreases slightly in the oxidation of C3H8 and C4H10 with the increasing proportion of DME in the LPG/DME mixtures. Further analysis shows that although the growth rate of H before ignition is LPG100 > LPG50 > DME, reaction R22 in the oxidation process of mixtures makes OH accumulate rapidly in a short time, resulting in a much higher peak concentration of OH than that of H; therefore, the ignition delay times of mixtures are shorter than those of neat LPG.

Experimental investigation of Ar-diluted ethylene catalytic ignition delay times over platinum particles under low temperatures

Experimental study on catalytic ignition ofn-C4H10/H2/air mixtures

Effects of hydrogen peroxide on the low-temperature ignition delay times of ethylene/air/Ar mixtures in an RCM

Experimental Study on Ethane Ignition Delay Times and Evaluation of Chemical Kinetic Models

Experimental and Kinetic Study on Ignition Delay Times of Dimethyl Ether at High Temperatures

Experimental and Modeling Study on Ignition Delay Times of Dimethyl Ether/n-Butane Blends at a Pressure of 2.0 MPa

Shock Tube and Kinetic Study of C2H6/H2/O2/Ar Mixtures at Elevated Pressures

Experimental And Kinetic Studies On Ignition Delay Times Of Dimethyl Ether/N-Butane/O-2/Ar Mixtures

An Experimental Investigation of Ethylene/o2/diluent Mixtures: Laminar Flame Speeds with Preheat and Ignition Delays at High Pressures

Ethylene Oxidation Experimental Study and Kinetic Mechanism Analysis Based on Shock Tube

Transition Between Thermal and Chemical Effect of Hydrogen Assisted N-Butane Fuel Catalytic Ignition over Pt Catalyst

Shock Tube Measurements and Kinetic Study on Ignition Delay Times of Lean DME/n-Butane Blends at Elevated Pressures

Experimental and Kinetic Study on Ignition Delay Times of DME/H2/O2/Ar Mixtures

Shock Tube Measurement of Ethylene Ignition Delay Time and Molecular Collision Theory Analysis

Experimental And Kinetic Study On Ignition Delay Times Of Liquified Petroleum Gas/Dirnethyl Ether Blends In A Shock Tube

Experimental and Kinetic Comparative Study on Ignition Characteristics of 1-Pentene and N-Pentane

Preparation of highly dispersed metallic Pt nanoparticle catalysts for low-temperature propene combustion

Experimental and Modeling Study on Ignition Delay Times of Dimethyl Ether/Propane/Oxygen/Argon Mixtures at 20 Bar

Effects of Diluents on the Ignition of Premixed H2/air Mixtures

An Ignition Delay Time and Chemical Kinetic Study of Ethane Sensitized by Nitrogen Dioxide

Experimental and Kinetic Study on Ignition Delay Times of Lean N -Butane/hydrogen/argon Mixtures at Elevated Pressures