Abstract:This study investigated the two-stage ignition behavior of NH 3 /H 2 mixtures using a rapid compression machine (RCM). The ignition delay times and first-stage ignition delay times of NH 3 /H 2 blends were measured at temperatures ranging from 881 to 1127 K, pressures of 15 and 25 bar, and equivalence ratios ( & phi;) of 1.0 and 1.5. Experimental results showed that H 2 had a significant promotional effect on the ignition of NH 3 , and two-stage ignition behavior was observed in some test mixtures. Time-resolved species concentrations were recorded using the gas chromatography (GC) method during the single- and two-stage ignition process. Species evolution suggested that the consumption of NH 3 and H 2 separated during the two-stage ignition process. The oxidation of H 2 primarily occurred at the first-stage ignition point, while NH 3 oxidation occurred at the total ignition point. A kinetic model was developed to predict the twostage ignition behavior of NH 3 /H 2 and the species profiles. Model analysis showed that H 2 played a key role in initiating the oxidation process and contributed to the early heat release. When H 2 content was high (e.g. 50%), its oxidation led to the simultaneous total oxidation of NH 3 , resulting in single-stage ignition characteristics. However, when a small amount of H 2 was present (e.g. 10%), its oxidation only partially consumed NH 3 , leading to the two-stage ignition behavior. Sensitivity analyses indicated that the co-oxidation of fuels during the first-stage ignition was primarily dominated by H 2 oxidation chemistry, while NH 3 oxidation became dominant during the following total ignition stage as H 2 was completely consumed. Additional model simulations revealed that the ignition behavior of NH 3 /H 2 mixtures is strongly influenced by temperature and pressure. A distinct threshold for temperature and pressure was identified, demarcating the transition between single-stage and two-stage ignition phenomena. Moreover, the fraction of H 2 in the mixture had a significant impact on the ignition behavior, with higher fractions leading to increased intensity of the first-stage ignition and closer proximity to the total ignition point. However, when the H 2 fraction exceeds a certain threshold, two-stage ignition behavior disappears.& COPY; 2023 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Time-resolved CO2 Concentration and Ignition Delay Time Measurements in the Combustion Processes of N-Butane/hydrogen Mixtures

Ignition-delay-time/time-resolved CO2-concentration Measurements During the Combustion of Ic4h10/h2 Mixtures

Ignition Delay Times of Ethane under O2/CO2 Atmosphere at Different Pressures by Shock Tube and Simulation Methods

Simultaneous Measurements of Temperature, CO, and CO2 Time-History in Reacting N-Heptane/o2/argon Mixtures Blended with Diethyl Ether B Ehind Reflecte D Shock Waves

Ignition Characteristics of Dual-Fuel Methane-N-hexane-oxygen-diluent Mixtures in a Rapid Compression Machine and a Shock Tube

Experimental and modeling study on ignition delays of lean mixtures of methane, hydrogen, oxygen, and argon at elevated pressures

Chemical Insights into the Two-Stage Ignition Behavior of NH3/H2 Mixtures in an RCM

Shock Tube Study of Ignition-Delay Measurements and Kinetic Mechanism Research for Syngas

Characteristics of hydrogen-assisted catalytic ignition of n-butane/air mixtures

Experimental and modeling study of ignition delay times of n-C5H12 and C3H6 under O2/CO2 atmospheres

Mechanism study on the auto-ignition and reaction kinetic characteristics of hydrogen/n-dodecane mixture under mid and high temperature conditions

Radiation and Kinetic Effects on the Ignition of H_2/Air/CO_2 Mixtures

Experimental and numerical study on the ignition delay times of dimethyl ether/propane mixtures in O2/CO2 atmospheres

An Autoignition Study of iso-Butanol: Experiments and Modeling

A Study on Measuring Ammonia-Hydrogen IDTs and Constructing an Ammonia-Hydrogen Combustion Mechanism at Engine-Relevant Thermodynamic and Fuel Concentration Conditions

Direct Modeling of Auto-Ignition and Flame Propagation of N-heptane-Air Mixtures at HCCI Conditions by Using Dynamic Multi-Timescale Method

Effect of nitrogen dioxide addition on ethane auto-ignition at different pressures and equivalence ratios: Experiments and chemical kinetic modeling

High-pressure Laminar Flame Speeds and Kinetic Modeling of Carbon Monoxide/hydrogen Combustion

Ignition Delay Time Measurements of Normal Alkanes and Simple Oxygenates

Experimental and kinetic modeling study on auto-ignition of ammonia/n-heptane mixtures at intermediate temperatures

Transition Between Thermal and Chemical Effect of Hydrogen Assisted N-Butane Fuel Catalytic Ignition over Pt Catalyst