Abstract:Background:The digital to analog converter (DAC) used in space-borne electronic system is unavoidable to be affected by the radiation, and it is essential to evaluate the DAC performance before formal application. Purpose:This study aims to develop an automatic measurement system of high-accuracy and high-speed for radiation-tolerance evaluation of space-borne D/A converters.Methods:Based on the peripheral component interconnection extensions for instrumentation (PXI), Kelvin (4-wire) method and mean filtering algorithm are applied to accurately monitor the voltage and current of the DAC chip, and a switch matrix configured in software is adopted to automatically switch over measurements of different parameters. Meanwhile the PXI bus synchronization and trigger mode control are used to achieve high-speed response among modular instruments, and the cubic spline algorithm is performed to accurately extract the single event saturated cross section and linear energy transfer threshold.Results:The identified voltage precision is 0.1μV, and the DAC monitoring precision is up to 24 bit. In single event effects evaluation, the monitoring frequency of current variation and register upset are 50 Hz and 100Hz respectively, and for total dose effect evaluation, only 8-s ergodic time are needed to measure all characteristic parameters.Conclusion:The designed measurement system can evaluate the performance of space-born DAC fully automatically and efficiently with high precision, which is a reference solution to such similar research.

Development of a New Type of Time-to-amplitude Converter

A Time-to-Amplitude Converter With High Impedance Switch Topology for Single-Photon Time-of-Flight Measurement

A Time-Encoding Machine Based High-Speed Analog-to-Digital Converter

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

Development of radiation tolerance evaluation and measurement system for spaceborne D/A converter

A High Resolution Large Dynamic Range TDC Circuit Implementation

The method of time-to-amplitude conversion and its application in laser range finding system

Development of a NIM Module for Time-to-digital Conversion

A 1.3mW 8-bit Two-step Time-to-Digital Converter

A Novel Programmable Pulse-Broadening Time Amplifier Controlled by Node Capacitance.

A Size, Weight, Power, and Cost-Efficient 32-Channel Time to Digital Converter Using a Novel Wave Union Method

Recent Developments and Design Challenges of High-Performance Ring Oscillator CMOS Time-to-Digital Converters

A 108fsrms 0.45mW 100MS/s 1.25MHz bandwidth multi-bit ΔΣ time-to-digital converter with dynamic element matching

A high precision, high linearity 10 bit Digital-to-Time Converter circuit.

A New Time-Digital Convert Circuit Based on Digital Delay Line

Carry chain based multi-channel time-to-digital converter

A high precision TDC based on a multi-phase clock

Design of a High Speed Low Power Time-to-Digital Converter Based on Multi-stage Amplification Structure

A High Resolution Time-to-Digital Converter (TDC) Based on Self-Calibrated Digital-to-Time Converter (DTC).

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A Highly Linear 5gs/s Voltage-to-time Converter for Time-Based Analog-to-digital Converters