Abstract:High-resolution and multichannel time-to-digital converters (TDCs) are needed in many electrical application systems. A new multistep fine time measurement method is proposed in this work, which is based on the delay-adjustable looped carry chains to obtain both high resolution and measurement precision. Each sub-step of the fine time measurement is assigned with a different measurement resolution in the descending order by dynamically configuring the delay line length. The time residue to be measured in the following sub-step becomes smaller, so that a finer resolution can be chosen. The overall oscillation number is the summation of the oscillation number of each sub-steps. The resolution of the TDC is determined by the last sub-step. So both high-resolution and small oscillation number (corresponding to high measurement precision) can be obtained. The TDC circuit was implemented on Stratix III field programmable gate array (FPGA) chip. Test results showed that the obtained resolution was less than 10 ps, and the measurement precision root mean square (rms) was about 13 ps. The differential nonlinearity (DNL) error and the integral nonlinearity (INL) error were in the range of −1 least significant bit (LSB) to 1 LSB without any bin calibration. The resource cost per TDC channel includes the lookup table (LUT) cost of 1064 and register cost of 318. The obtained TDC is comprehensively good considering its low resource cost and high linearity, and it is promising for multichannel TDC design.

A High Resolution Large Dynamic Range TDC Circuit Implementation

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

A High Resolution Time-to-Digital Converter (TDC) Based on Self-Calibrated Digital-to-Time Converter (DTC).

A low-power coarse-fine time-to-digital converter in 65nm CMOS

A high precision TDC based on a multi-phase clock

A 1.3mW 8-bit Two-step Time-to-Digital Converter

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

A 10b, 0.7ps resolution coarse-fine time-to-digital converter in 65nm CMOS using a time residue amplifier

A 8bits, 6.2ps Resolution Two-Step Time-to-digital Converter with Set-Reset-based Arbiters and Signal Tracking Mechanism

High-Resolution, Multi-Channel FPGA-Based Time-to-Digital Converter

A High-Resolution Time-To-Digital Converter Based on Parallel Delay Elements

A high precision, high linearity 10 bit Digital-to-Time Converter circuit.

Time-Domain Approach for Analog Circuits: Fine-Resolution TDC and Quick-Start CDR Circuits

A New Time-Digital Convert Circuit Based on Digital Delay Line

A Low Power Tdc With 0.5ps Resolution For Adpll In 40nm Cmos

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A Three-Step Multi-Resolution Time-to-Digital Converter.

Carry chain based multi-channel time-to-digital converter

Recent Developments and Design Challenges of High-Performance Ring Oscillator CMOS Time-to-Digital Converters

Two-Stage Vernier-Based Time-to-Digital Converter with Enhanced Resolution and Digital Error Correction