Abstract:Shunt capacitor banks are essential for reactive power compensation, ensuring voltage stability, and reducing system losses. These banks consist of multiple units with components in series and parallel. A few component failures do not immediately affect the safe operation of the capacitor bank, but component breakdown can lead to voltage redistribution. Under combined factors such as system overvoltage and equipment aging, and others can trigger an avalanche effect causing capacitor breakdown, resulting in significant safety accident risks. Practical operation experience shows that partial component breakdown generates many transient disturbance signals. Quantitative analysis of these signals can detect capacitor bank anomalies early. This paper proposes the quantitative extraction of transient disturbance characteristics using the Prony algorithm and estimates the phase and number of capacitors that break down to judge capacitor anomalies. The simulation part verifies the theoretical analysis and detection algorithm’s correctness through numerical simulations and PSCAD (Power Systems Computer Aided Design) electromagnetic transient simulations. The numerical simulations consider different signal lengths, noise levels, attenuation coefficients, and oscillation frequencies. In the PSCAD simulation environment, verification models are built under varying sampling frequencies, numbers of breakdown components, signal lengths, and signal-to-noise ratios. These simulation results verify the accuracy of the detection algorithm under different conditions.

Characteristic Analysis and Simulation of Power Capacitor Breakdown in Shunt Capacitor Bank

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Estimation of abnormal states in shunt capacitor banks using transient disturbance feature extraction

Analyses of Static and Dynamic Reactive Power Allocation Between Synchronous Compensators and Shunt Capacitors to Counter Commutation Failures

Study of Insulation Protection for Reactive Compensation Capacitors

Analysis and Design in Extra High Voltage Circuit Breakers Employing Shunted Capacitors

Research on Power Capacitor Internal Fault Criterion

Research on Overvoltage of Parallel Capacitors in 500kv Substation and Its Protection Parameters

Analysis of high voltage shunt capacitor bank over-voltage breakdown detection

Analysis of failure of a circuit breaker employed for capacitor switching: A review

A Diagnostic Criterion for Power Capacitor in Distribution Network

Simulation analysis of the 126kV three-break vacuum circuit breaker with phase-control method used in capacitive interrupting

Research on Steady and Transient Characteristic of Series Compensation Device in Distribution Network

Research on 40.5kv Two-Break Vacuum Circuit Breaker for Switching Capacitor Banks

Simulation Of Breaking Characteristics Of A 550 Kv Single-Break Tank Circuit Breaker

Simulation on Transient Characteristics of Medium Voltage DC Distribution System

Research on Capacitor Bank Failure Processing Methods

Study on Characteristic Parameter Selection of Alternating Current Filter Sub-Bank Circuit Breaker

Three-phase Modeling of 40.5-Kv Vacuum Circuit Breaker Switching off Shunt Reactors and Overvoltage Suppression Measure Analysis

Study on Transients and Effect on Capacitor Voltage Transformer Caused by Disconnector Switching of UHV Series Capacitor Banks

Simulation and fault analysis of DC breaker in HVDC converter station