Abstract:For maximum torque control of induction machines (IM) in flux-weakening region, the following problems exist: 1. In Volts/Hz scalar control mode, a slow frequency ramp time cannot provide sufficient electromagnetic torque, whereas the excessive acceleration leads to overcurrent shutdown and system collapse; 2. In vector control mode, the under-estimated leakage inductance in field-weakening region can lead to system instability. To solve these problems, this paper presents a method based on both stability criteria and maximum torque capability for determining a proper frequency ramp-up profile. It retains the maximum torque output capacity on the basis of guaranteeing system stability in flux-weakening region. A proportional and integral (PI) controller is employed to adjust the frequency ramp time, which will be halted if the magnetizing current exceeds a predefined limit. Moreover, the proposed scheme has a larger tolerance of underestimated leakage inductance as compared with the vector controlled IM drives in flux-weakening region. Simulation studies on a 3hp (2.2kW) and a 20hp (15kW) have been conducted in both Volts/Hz and vector control modes. Experimental validation is presented on a 3hp (2.2kW) platform in Volts/Hz control mode. Both simulation and experimental results validate the analysis and show effectiveness of the proposed method in the defined scenarios.

Maximum Torque per Ampere Vector Control of Synchronous Reluctance Motors

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Sliding-mode Torque Distribution Control of SRM

A high efficiency direct instantaneous torque control of SRM using commutation angles control

Optimum Design of Switched Reluctance Motor Based on Direct Instantaneous Torque Control

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

MTPA Control for Scalar Controlled Synchronous Reluctance Motor

Maximum Torque Output for Volts/hz Controlled Induction Machines in Flux-Weakening Region

A Combined Control Strategy over Full Speed Range of Synchronous Reluctance Motor Considering Iron Loss

Maximum Torque Per Ampere Control Strategy Based on Space Vector for Induction Motors

Permanent Magnet Synchronous Motor Maximum Torque Per Ampere Control Based on Feedback Dissipative Realization

Torque and Flux Weakening Control with MTPV for Interior Permanent Magnet Synchronous Motor

Adaptive Complementary Sliding Mode Control for Synchronous Reluctance Motor With Direct-Axis Current Control

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

Maximum Torque Per Ampere Sensorless Control of SynRM Based on Mixed Signal Injection and Extended Back-EMF

A Simple Strategy for Parameters Identification of SRM Direct Instantaneous Torque Control

Synchronous Reluctance Motor Performance Improvement Using MTPA Control Strategy and Five-Level Inverter Topology

Automated Maximum Torque per Ampere Identification for Synchronous Reluctance Machines with Limited Flux Linkage Information

Effective Exploitage of the Reluctance Torque and Its Predicti veControl System on Permanent-Magnet Synchronous Motors

Maximum Torque/minimum Flux Control of Interior Permanent Magnet Synchronous Motor Based on Magnetic Energy Model

Maximum Torque Per Ampere Control of PMa-synRM Based on Online Parameter Identification