Abstract:This article proposes an optimized direct instantaneous torque control (DITC) scheme for switched reluctance motor (SRM) drives with a novel adaptive dynamic commutation strategy, which can effectively reduce torque ripple and improve system efficiency. To minimize torque ripple, two operational modes are developed for torque tracking during commutation regions. In Mode I, the torque error is compensated by the outgoing phase during the current buildup region of the incoming phase; in Mode II, the torque error is compensated by the incoming phase during the demagnetization region of the outgoing phase. To implement the proposed DITC scheme in a more effective conduction range, the commutation instants are dynamically adjusted according to the varied operation conditions. For each phase, the turn-on and turn-off angles are modified in each electrical cycle by a torque error regulator and a phase current endpoint detector, respectively. By employing the proposed strategy, the torque generation capability is fully utilized for minimized torque ripple, and the phase currents work within a more effective conduction range for improved system efficiency. The simulation and experiments on a three-phase 12/8 SRM are carried out to verify the feasibility and effectiveness.

Direct Instantaneous Torque Control of Srm Based on New Flux Linkage Detection Method

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

A Simple Strategy for Parameters Identification of SRM Direct Instantaneous Torque Control

Low-Cost Direct Instantaneous Torque Control for Switched Reluctance Motors with Bus Current Detection under Soft-Chopping Mode

A high efficiency direct instantaneous torque control of SRM using commutation angles control

Optimum Design of Switched Reluctance Motor Based on Direct Instantaneous Torque Control

Implementation and Evaluation of Direct Instantaneous Torque Control for Switched Reluctance Machine with Low-Resolution Rotor Position Sensor

Direct Instantaneous Torque Control of Switched Reluctance Motor with Five Level Converter

PWM-Based Direct Instantaneous Torque Control of Switched Reluctance Machine

An Improved Direct Instantaneous Torque Control Based on Adaptive Terminal Sliding Mode for a Segmented-Rotor SRM

Direct Torque Control Based on Simple Duty Ratio and Fixed Switching Frequency for PMSM

Deadbeat direct torque control for surface permanent magnet synchronous motor

Direct Control of Current Vector for Surface-mounted Permanent Magnet Synchronous Motor

Wave-Form Detection Technique for Indirect Rotor-Position Sensing of Switched-Reluctance Motor-Drives .2. Experimental Results

Application of Direct Instantaneous Torque Control System in Switched Reluctant Motor

Comparative Evaluation of Voltage Space Vector Control and Direct Instantaneous Torque Control for Switched Reluctance Motor Drives

Direct instantaneous torque control of switched reluctance motor based on adaptive backstepping

Torque Ripple Minimization of a Novel Modular Stator Switched Reluctance Motor Based on Direct Instantaneous Torque Control

Overview of the Direct Torque Control Strategy in Switched Reluctance Motor Drives