Abstract:The classical switching-table-based direct torque control (ST-DTC) suffers from issues such as large torque ripples, significant current harmonics, and variable switching frequency. In this paper, a novel ST-DTC is proposed to improve the current and torque steady-state performance for dual three-phase permanent magnet synchronous motor (DTP-PMSM). Firstly, proportional resonance (PR) controllers are used in the x-y subspace, and the x-y reference voltage generated by PR controllers is modulated by three fixed vectors based on the analysis of flux and torque slopes of voltage vectors with different amplitudes. This reduces current harmonics and computational burden of modulating the x-y reference voltage. Secondly, duty-ratio modulation is employed to reduce the torque ripple. However, under the traditional torque regulator, the duty-ratio modulation exists a torque range where it cannot achieve the instantaneous zero error of torque at the end of the control period. Therefore, the feedback value of the torque regulator is modified to further suppress torque ripple. Furthermore, to prevent generating incorrect switch sequences caused by the short dwell time of vectors and maintain the thermal balance of the inverter, an optimization of the switching sequence is performed. Finally, experimental results are presented to validate the effectiveness of the proposed method.

Flux-Linkage Loop-Based Model Predictive Torque Control for Switched Reluctance Motor

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Computational-Efficient Model Predictive Torque Control for Switched Reluctance Machines With Linear-Model-Based Equivalent Transformations

Torque Ripple Minimization of Switched Reluctance Motor Based on Iterative Learning Control

Sliding-mode Torque Distribution Control of SRM

Direct Instantaneous Torque Control of Srm Based on New Flux Linkage Detection Method

Model predictive flux control for permanent magnet synchronous motor

New model based predictive torque control algorithm in combination with duty ratio modulation strategy for flux-switching permanent magnet synchronous machines

An Improved Model-Predictive Torque Control of Switched Reluctance Motor Based on Sector Adaptive Allocation Technology

A Simple Strategy for Parameters Identification of SRM Direct Instantaneous Torque Control

Model Predictive Control Strategies in Switched Reluctance Motor Drives – an Overview

A Position Sensorless Torque Control Strategy for Switched Reluctance Machines With Fewer Current Sensors

Optimum Design of Switched Reluctance Motor Based on Direct Instantaneous Torque Control

A high efficiency direct instantaneous torque control of SRM using commutation angles control

A novel direct torque control method for switched reluctance motors based on optimal turn-on angle

Torque Ripple Suppression Method of Switched Reluctance Motor Based on an Improved Torque Distribution Function

A Novel Model Predictive Torque Control of SRMs With Low Measurement Effort

A Novel Switching-Table-Based Direct Torque Control with Improved Current and Torque Steady-State Performance for Dual Three-Phase PMSM