Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Pulsed magnetization characteristic of amorphous cores for fast linear transformer driver

Pulsed magnetizing property of the core made of 0.08mm DG4 silicon steel foil

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Pulse Magnetic Properties Measurement and Characterization of Fe-Based Nanocrystalline Cores for High-Voltage Pulse Magnetics Applications

Relationship of pulsed permeability of magnetic cores with annealing Metglas and interlayer insulation films to applied voltage slope

Characterization of soft magnetic material METGLAS 2605S-3A for power applications and transformers

Loss characteristics of glassy alloy magnetic core under pulsed magnetization

Loss and permeability characterization of Fe-based nanocrystalline cores for pulsed power magnetic applications

Design and performance of a pulse transformer based on Fe-based nanocrystalline core

ELECTRO-MAGNETIC PARAMETERS ON HIGH CURRENT PULSE LINEAR TRANSFORMERS DRIVER

Criterion of Magnetic Saturation and Simulation of Nonlinear Magnetization for a Linear Multi-Core Pulse Transformer

Study on the Measurement of Pulse Magnetization Characteristics of Toroidal Magnetic Cores

Characteristics of Normal Magnetic Flux in Composite Materials Transformer Core

Circuit Simulation with Nonlinear Magnetic Core of a New Linear Transformer Driver Stage

Stability Of Properties On Magnetic Ribbon And Cores With Domestic Fe-Based Amorphous Alloy For Hts Amdt

The Numerical Simulation of a Four-Stage Linear Transformer Driver Module Based on the Preisach Magnetic Core Model.

Laminated nanocrystalline-ferrite high saturation magnetic flux density composite core for use in high-frequency transformers

Measurement of Dynamic Characteristics of Large Dimension Nanocrystalline Core

Effect of WEDM Electrical Parameters on Micro-morphology and Magnetic Properties of Stacked Amorphous Iron Cores

Study on the influence of core material on the performance of nanosecond pulse power supply

Core loss measurement and comparative analysis for soft magnetic materials under complex non-sinusoidal excitations