Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Criterion of Magnetic Saturation and Simulation of Nonlinear Magnetization for a Linear Multi-Core Pulse Transformer

Iron Core Nonlinearities of Power Transformer

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

The Numerical Simulation of a Four-Stage Linear Transformer Driver Module Based on the Preisach Magnetic Core Model.

Analytical Calculation of Magnetic Field and Electromagnetic Performance for Permanent Magnet Assisted Synchronous Reluctance Motors Considering Saturation Effect

Circuit Simulation with Nonlinear Magnetic Core of a New Linear Transformer Driver Stage

Low-frequency Dual Reversible Model of the Single-Phase Two-Winding Transformer Considering the Gradually Quicker Saturation Process of the Core

Torque Analytical Model of Switched Reluctance Motor Considering Magnetic Saturation

Analytical Modeling for Inductance and Torque of Switched Reluctance Motor Considering Iron Core Magnetic Saturation

Pulse Magnetic Properties Measurement and Characterization of Fe-Based Nanocrystalline Cores for High-Voltage Pulse Magnetics Applications

Analytical Modeling of Magnetic Field Considering the Saturation in Switched Reluctance Motor

Study On Modeling Of High Frequency Power Pulse Transformer

Measurement Method of Deeply Saturated Excitation Characteristics of Converter Transformer Under AC-DC Hybrid Excitation

ELECTRO-MAGNETIC PARAMETERS ON HIGH CURRENT PULSE LINEAR TRANSFORMERS DRIVER

Modelling and Theoretical Analysis of an Air-Core Transformer with Strong Coupled Schemes

Study of Modeling and Simulation of Magnetic Modulator

Magnetic Flux Density Analysis of Series Resonant Converter Operating in Discontinuous Conduction Mode for High‐voltage High‐power Applications

Influence of saturation levels on transformer equivalent circuit model

Magnetic state balance technology of transformer based on magnetic field modulation strategy

Pulsed magnetization characteristic of amorphous cores for fast linear transformer driver

Low-frequency Model for Single-Phase Transformers Based on the Three-Component Preisach Model Considering Deep Saturation