Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Circuit Simulation with Nonlinear Magnetic Core of a New Linear Transformer Driver Stage

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

Iron Core Nonlinearities of Power Transformer

Model Analysis and Simulation of a Novel Self-Triggering Linear Transformer Driver

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

FE-based equivalent circuits for simulating transformer internal faults

Dynamic Characteristics of Moving-Magnet Linear Compressor Based on Finite Element Method

Magnetic Design and Experimental Evaluation of a Commercially Available Single Integrated Transformer in Three-Phase LLC Resonant Converter

THE CFD SIMULATION RESEARCH ON HYDRAULIC TRANSFORMER

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Design and Simulation of a Self-Triggering Linear Transformer Driver

Study of Nonlinear Excitation Circuits for Fluxgate Magnetometer

Component-Level Thermo-Electromagnetic Nonlinear Transient Finite Element Modeling of Solid-State Transformer for DC Grid Studies

Research on Magnetic-Thermal-Force Multi-Physical Field Coupling of a High-Frequency Transformer with Different Winding Arrangements

Magneto-thermal coupling simulation and experimental verification for a three-winding high-frequency transformer

Analysis of Fine Fault Electrothermal Characteristics of Converter Transformer Reduced-Scale Model

High Frequency Magnetic Core Loss Study

Influence of Non-Linearity in Losses Estimation of Magnetic Components for DC-DC Converters

The Improved Magnetic Shield Type High T/sub C/ Superconducting Fault Current Limiter and the Transient Characteristic Simulation