Abstract:Owing to the significant advantages of linear transformer driver (LTD) technology, it becomes a new pulsed power technology for the construct of high-voltage, high-current pulsed-power accelerators. However, the LTD technology requires that the closure of the switches in the cavities are synchronized with the arrival of the electromagnetic pulse propagating downstream and the trigger technology is hard to achieve the stringent demands on the cavity-triggering sequences at present. In this paper, one kind of self-trigger LTD technology which is based on the principle of electromagnetic induction is proposed. In order to explore the feasibility of self-trigger LTD, a circuit model of a self-trigger LTD module composed of 60 1-MA cavities is established in PSPICE. Through simulation of the model, in which the closure of the gas switches in the cavities are depended on the threshold voltages of gas switches, the output pulse shaping capability of a self-trigger LTD module is analyzed. The results demonstrate that the 10%-90% rise time and the peak of output current of the self-trigger LTD module is acceptable compared with the output current of a LTD module, in which the firing sequence of each LTD cavity is synchronized with the speed the electromagnetic pulse propagates along the output line. The self-trigger LTD module can generate synchronous trigger pulses with the 10%-90% rise time of 53ns and the peak voltage of 100kv. The self-trigger LTD modules with different cavity-triggering sequences are simulated and their cavity-triggering sequences have been detected. The peak current at the output of self-trigger LTD module is in the range of 0.91MA to 0.95 MA with the 10%-90% rise time alters in the range of 53ns to 70n.

Model Analysis and Simulation of a Novel Self-Triggering Linear Transformer Driver

Design and Simulation of a Self-Triggering Linear Transformer Driver

Model Analysis and Simulation of a Self-Trigger LTD Module

Design of a Novel Self-Triggering Linear Transformer Driver

A New Triggering Technology Based on Inductive Transformer for Linear Transformer Driver (LTD) Switches

A new triggering technology based on inductive transformer for LTD switches

Trigger Method Based on Secondary Induced Overvoltage for Linear Transformer Drivers

Multi-output Synchronization Trigger for Linear Transformer Driver

Performance Analysis of DC-Biased Modular Linear Variable Flux Reluctance Machines

Numerical Analysis of the Output-Pulse Shaping Capability of Linear Transformer Drivers

Development of Linear Transformer Driver

Simulation and Primary Experimentation of Fast Linear Transformer Driver Module

Primary investigation of fast linear transformer driver module

Effect of Cavity-Triggering Sequences on Output Parameters of LTD-Based Drivers

The Numerical Simulation of a Four-Stage Linear Transformer Driver Module Based on the Preisach Magnetic Core Model.

Trigger Method Based on Internal Bricks Within Cavities for Linear Transformer Drivers

Effect Analysis of Switch Prefire in Linear Transformer Drivers

300-Ka Fast Linear Transformer Driver Stage

Design and Simulation of Fast Linear Transformer Driver with Four Stages in Series Sharing Common Cavity Shell and Mega-Ampere Current

Influences of Switching Jitter on the Operational Performances of Linear Transformer Drivers-Based Drivers

Modeling and Tests of Nested Transmission Lines for Current Adding on a Four-Stage Linear Transformer Driver