Abstract:An open-loop pulsed hysteresis graph system can magnetize and characterize ceramic and rare-earth permanent magnets such as neodymium, samarium cobalt, and alnico of cylindrical and rectangular shapes. The prototype system relies on an air-core excitation coil with an inner diameter of 3 cm and a length of 10 cm. A pulsed power supply provides a transient current pulse of up to 9000 A into the air-core coil. The pulse duration is typically on the order of 15 to 20 ms. In addition, a pair of Helmholtz coils records the applied magnetic field strength, whereas a local coil, tightly wound around the permanent magnet, records the magnetic flux density in the sample. Both fields are electronically acquired, digitized, and processed in a digital computer to obtain the hysteresis graph response of the sample. The processing takes into account the demagnetization field due to the open-loop system configuration. This paper presents the system concept in terms of the hardware and software realizations. An integral part of the data processing is calculation of the demagnetization factors that are needed to correct for the open-loop magnetization arrangement. Furthermore, a finite-element postprocessing procedure corrects for the influence of eddy currents in highly conductive samples. In tests of the prototype system with ceramic and neodymium permanent magnet samples, the pulsed field predictions compare favorably against reference data and dc hysteresis graph measurements of samples of low conductivity. Even for high-conductivity samples such as alnico, good agreement can be achieved through suitable post processing steps.

Loss characteristics of glassy alloy magnetic core under pulsed magnetization

Pulsed magnetization characteristic of amorphous cores for fast linear transformer driver

Comparative Analysis of Core Loss Calculation Methods for Magnetic Materials Under Nonsinusoidal Excitations

Core loss measurement and comparative analysis for soft magnetic materials under complex non-sinusoidal excitations

Losses Analysis of Soft Magnetic Ring Core under Sinusoidal Pulse Width Modulation (SPWM) and Space Vector Pulse Width Modulation (SVPWM) Excitations

Modeling analysis of pulsed magnetization process of magnetic core based on inverse Jiles-Atherton model

Iron Loss and Hysteresis Properties of Nanocrystalline Magnetic Materials Under High Frequency Inverter Excitation

An Improved Steinmetz Premagnetization Graph (Spg) Applied In High Magnetic Field

Core loss calculation for magnetic materials employed in SMPS under rectangular voltage excitations

Relationship of pulsed permeability of magnetic cores with annealing Metglas and interlayer insulation films to applied voltage slope

Characterization of soft magnetic material METGLAS 2605S-3A for power applications and transformers

Modeling of Air Gap Magnetic Characteristics of Anode Saturable Reactors under Impulse Current Excitation

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Calculation Method of Core Loss Under Intermediate Frequency Excitation

Comparative Analysis of Magnetic Core Loss Measurement Methods with Arbitrary Excitations

Research on loss characteristic of soft magnetic composites under nonsinusoidal excitations with DC bias field

Rotational Core Loss of Silicon Steel Laminations Based on Three-Dimensional Magnetic Properties Measurement

An instant loss analysis model for complex magnetic core materials

High frequency magnetic loss characteristic analysis and calculation of magnetostrictive Tb-Dy-Fe alloys under multivariable comprehensive operation conditions

Open-loop pulsed hysteresis graph system for the magnetization of rare-earth magnets

Steinmetz Equation for Gapped Magnetic Cores