Abstract:White-light OLED devices play an important application in information display fields. Optical interference of the microcavity structure has an important effect on device performances. According to the design of the band structure, ITO/MoO3 composite films were used as the anode, and Mg : Ag (1%) composite films were prepared by coevaporation as the translucent cathode; CuPc was used as the hole injection layer and anode passivation layer, NPB as the hole transmission layer and yellow light main material, rubrene as yellow dopant material, ADN as blue light main material, DSA-Ph as blue dopant material, and TPBi and Alq3 as the electron transport layers. We realized the change of the microcavity structure by adjusting the thickness of each organic functional layer film and simulated and calculated the optimized thickness of each organic film layer and influence on OLED device performances using the SimOLED software system. The optimized OLED microdisplay structure is Si(CMOS)/ITO (35 nm)/MoO3 (2 nm)/CuPc (5 nm)/2-TNATA (20 nm)/NPB (10 nm)/NPB : rubrene (1.5%)ADN : DSA-Ph (5%) (25 nm)/TPBi (15 nm)/Alq3 (1.2 nm)/Mg (13 nm) : Ag (1%). The optimized OLED microdisplay was prepared by the vacuum coating system, and the photoelectric performances of the OLED device were characterized by a spectral testing system consisting of the Photo Research PR655 spectrometer and Keithley 2400 program-controlled power supply. The effect of the microcavity structure on OLED device performances was studied. The results show that the variation of the film thickness of each organic functional layer has an important effect on the performances of OLED microdisplay, such as brightness and color coordinate, and the OLED microdisplay reaches a higher brightness of 3342 cd/m2 under the normal working voltage at 5.0 V after the structure is optimized, with CIE coordinate (0.28, 0.37), which is closer to the energy point of standard white light.

Optimization of AIQ Thickness in Double Layer Organic Light-emitting Devices

Effects of Organic/Organic Interface on Recombination Efficiency in Double-Layer Organic Diodes

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Optimal thickness of hole transport layer in doped OLEDs

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Influence of Different Hole Transport Layer on the Performance of Organic Light-Emitting Devices

Effective Intermediate Layers for Highly Efficient Stacked Organic Light-Emitting Devices

Organic light-emitting diodes with varying thickness of bathocuproine layer

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Study on ITO/Ag/ITO multilayer film as the electrode of organic light-emitting diodes

Operational stability enhancement in organic light-emitting diodes with ultrathin Liq interlayers

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Design Simulation and Preparation of White OLED Microdisplay Based on Microcavity Structure Optimization

Enhance external quantum efficiency of organic light-emitting devices using thin transparent electrodes

Hybrid Organic Light Emitting Device with Silicon-Rich Oxide As Hole Transporting Layer