Abstract:A harmonic division technique is proposed for an open-loop resonator fiber optic gyro (RFOG) to suppress semiconductor laser diode's (LD's) intensity modulation noise. The theoretical study indicates the RFOG with this technique is immune to the intensity noise. The simulation and experimental results show this technique would lead to a diminished linear region, which still could be acceptable for an RFOG applied to low rotation rate detection. The tests for the gyro output signal are carried out with/without noise suppressing methods, including the harmonic division technique and previously proposed signal compensation technique. With the harmonic division technique at the rotation rate of 10deg/s, the stability of gyro output signal is improved from 1.07deg/s to 0.0361deg/s, whose noise suppressing ratio is more than 3 times as that of the signal compensation technique. And especially, a 3.12deg/s signal jump is significantly removed with the harmonic division technique; in contrast, a residual 0.36deg/s signal jump still exists with the signal compensation technique. It is concluded the harmonic division technique does work in intensity noise suppressing under dynamic condition, and it is superior to the signal compensation technique.

A Design of Digital Dual-Phase Lock-in Amplifier Applied to Resonator Fiber Optic Gyro

Design of Digital Lock-in Amplifier in Resonator Fiber Optic Gyro

Research on digital signal detection method in closed loop fiber gyros

Design of High Frequency Lock-in Amplifier Applied in R-MOG

Design and Implementation of the Digital Detection Circuit for RFOG Based on a Single FPGA

Digital Detection and Optimization Design for Resonant Fiber Optic Gyroscope

Open-loop Operation Experiments in a Resonator Fiber-Optic Gyro Using the Phase Modulation Spectroscopy Technique.

CORDIC Algorithm Based Digital Detection Technique Applied in Resonator Fiber Optic Gyroscope

Frequency Locking Technique in Digital Closed-Loop Resonator Fiber Optic Gyro

Short Fiber Resonant Optic Gyroscope Using the High-Frequency Pound-Drever-Hall Technique.

Resonator Fiber Optic Gyroscope with an All Digitalized System

All Digital Close-Loop Operation of Resonator Fiber Optic Gyro

Digital Signal Processing for a Closed-Loop Resonant Fiber Optic Gyro

Reach on A/D、D/A Used in Digital Resonator Fiber Optic Gyro

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

Low-Noise Low-Delay Digital Signal Processor for Resonant Micro Optic Gyro

A closed-loop RFOG based on digital serrodyne and sine modulations with two LiNbO3 phase modulators

Coherent Detection Technique For Resonant Fiber Optic Gyroscope

Research on Digital Modulated Resonator Fiber-optic Gyro