Abstract:Bolted spherical joints are widely used to form space steel structures. The stiffness and load capacity of the structures are affected by the looseness of bolted spherical joint connections in the structures. The looseness of the connections, which can be caused by fabrication error, low modeling accuracy, and "false twist" in the installation process, may negatively impact the load capacity of the structure and even lead to severe accidents. Furthermore, it is difficult to detect bolted spherical joint connection looseness from the outside since the bolts connect spheres with rods together from the inside. Active sensing methods are proposed in this paper to monitor the tightness status of the bolted spherical connection using piezoceramic transducers. A triangle-on-triangle offset grid composed of bolted spherical joints and steel tube bars was fabricated as the specimen and was used to validate the active sensing methods. Lead Zirconate Titanate (PZT) patches were used as sensors and actuators to monitor the bolted spherical joint tightness status. One PZT patch mounted on the central bolted sphere at the upper chord was used as an actuator to generate a stress wave. Another PZT patch mounted on the bar was used as a sensor to detect the propagated waves through the bolted spherical connection. The looseness of the connection can impact the energy of the stress wave propagated through the connection. The wavelet packet analysis and time reversal (TR) method were used to quantify the energy of the transmitted signal between the PZT patches by which the tightness status of the connection can be detected. In order to verify the effectiveness, repeatability, and consistency of the proposed methods, the experiments were repeated six times in different bolted spherical connection positions. The experimental results showed that the wavelet packet analysis and TR method are effective in detecting the tightness status of the connections. The proposed active monitoring method using PZT transducers can monitor the tightness levels of bolted spherical joint connections efficiently and shows its potential to guarantee the safety of space steel structures in construction and service.

Bolt Looseness Detection Based on Piezoelectric Time Reversal Method

Bolt Loosening Detection Based on Piezoelectric Active Sensing Technology*

Health monitoring of bolted joints using the time reversal method and piezoelectric transducers

Bolt Looseness Detection Using SH Guided Wave and Wave Energy Transmission

Real time bolt preload monitoring using piezoceramic transducers and time reversal technique—a numerical study with experimental verification

A piezoelectric active sensing method for quantitative monitoring of bolt loosening using energy dissipation caused by tangential damping based on the fractal contact theory

Bolt tightness monitoring using multiple reconstructed narrowband lamb waves combined with piezoelectric ultrasonic transducer

Electromechanical impedance instrumented wearable piezoelectric ring-type sensor for bolted connection monitoring

Monitoring the looseness of a bolt through laser ultrasonic

Application of subharmonic resonance for the detection of bolted joint looseness

Multi-bolt looseness monitoring using guided waves: a cross-correlation approach of the wavelet energy envelope

Preload Monitoring of Bolted L-Shaped Lap Joints Using Virtual Time Reversal Method

Health Monitoring of Bolt Looseness in Timber Structures Using PZT-Enabled Time-Reversal Method

An Experimental Study on Bolt Looseness Monitoring Using Low-Cost Transfer Impedance Technique

Noninvasive Stress Detection Based on Piezoelectric Micromachined Ultrasonic Transducers for Bolt Loosening Warning

Health Monitoring of Bolted Spherical Joint Connection Based on Active Sensing Technique Using Piezoceramic Transducers

A New Diagnostic Method of Bolt Loosening Detection for Thermal Protection Systems

A bolt preload monitoring method based on the refocusing capability of virtual time reversal

A Review of Bolt Tightening Force Measurement and Loosening Detection

Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method