Abstract:Bolted spherical joints are widely used to form space steel structures. The stiffness and load capacity of the structures are affected by the looseness of bolted spherical joint connections in the structures. The looseness of the connections, which can be caused by fabrication error, low modeling accuracy, and "false twist" in the installation process, may negatively impact the load capacity of the structure and even lead to severe accidents. Furthermore, it is difficult to detect bolted spherical joint connection looseness from the outside since the bolts connect spheres with rods together from the inside. Active sensing methods are proposed in this paper to monitor the tightness status of the bolted spherical connection using piezoceramic transducers. A triangle-on-triangle offset grid composed of bolted spherical joints and steel tube bars was fabricated as the specimen and was used to validate the active sensing methods. Lead Zirconate Titanate (PZT) patches were used as sensors and actuators to monitor the bolted spherical joint tightness status. One PZT patch mounted on the central bolted sphere at the upper chord was used as an actuator to generate a stress wave. Another PZT patch mounted on the bar was used as a sensor to detect the propagated waves through the bolted spherical connection. The looseness of the connection can impact the energy of the stress wave propagated through the connection. The wavelet packet analysis and time reversal (TR) method were used to quantify the energy of the transmitted signal between the PZT patches by which the tightness status of the connection can be detected. In order to verify the effectiveness, repeatability, and consistency of the proposed methods, the experiments were repeated six times in different bolted spherical connection positions. The experimental results showed that the wavelet packet analysis and TR method are effective in detecting the tightness status of the connections. The proposed active monitoring method using PZT transducers can monitor the tightness levels of bolted spherical joint connections efficiently and shows its potential to guarantee the safety of space steel structures in construction and service.

A piezoelectric active sensing method for quantitative monitoring of bolt loosening using energy dissipation caused by tangential damping based on the fractal contact theory

A Fractal Contact Theory Based Model for Bolted Connection Looseness Monitoring Using Piezoceramic Transducers

A Novel Fractal Contact-Electromechanical Impedance Model for Quantitative Monitoring of Bolted Joint Looseness

Bolt Loosening Detection Based on Piezoelectric Active Sensing Technology*

The Health Monitoring of Bolt Connection Structure Based on Wave Energy Loss of Structural Interface

A piezoelectric active sensing method for detection of bolt load loss

Bolt Loosening Detection for Aerospace Thermal Protection Structures Based on Piezoelectric Impedance Method

Bolt Looseness Detection Based on Piezoelectric Time Reversal Method

Proof-Of-Concept Study Of Monitoring Bolt Connection Status Using A Piezoelectric Based Active Sensing Method

Bolt Looseness Monitoring Based on the Peak Frequency Shift of Piezoelectric Material on the Nut

State Monitoring of Bolted Joints Based on Frequency Tracking Method

Research on Bolt Loosen Detection Based on Piezoelectric Impedance Technology

A Smart Washer for Bolt Looseness Monitoring Based on Piezoelectric Active Sensing Method

Real time bolt preload monitoring using piezoceramic transducers and time reversal technique—a numerical study with experimental verification

Monitoring of early looseness of multi-bolt connection: a new entropy-based active sensing method without saturation

Electromechanical impedance instrumented wearable piezoelectric ring-type sensor for bolted connection monitoring

Monitoring the looseness of a bolt through laser ultrasonic

Health monitoring of bolted joints using the time reversal method and piezoelectric transducers

Coda Wave Interferometry-Based Very Early Stage Bolt Looseness Monitoring Using a Single Piezoceramic Transducer

Health Monitoring of Bolted Spherical Joint Connection Based on Active Sensing Technique Using Piezoceramic Transducers

Bolt Looseness Detection Based on Piezoelectric Impedance Frequency Shift