Process simulation of synthesis of ethyl acetate by reactive distillation catalyzed by ionic liquid

Yanbo DONG,Ruining HE,Chunxia MU,Yun ZOU,Zhangfa TONG
DOI: https://doi.org/10.16085/j.issn.1000-6613.2017-0719
2018-01-01
Abstract:In order to study the effect of ionic liquid in reactive distillation,the synthetic process of ethyl acetate by reactive distillation was simulated using ionic liquid 1-butyl-3-methylimidazolium hydrogen sulfate ([BMIM]HSO4)as catalyst.On the basis of the obtained parameters of esterification reaction kinetics,the reaction distillation process was established with Aspen Plus software.The effects of catalyst dosage,distillation plate number,reaction plate number,feed position,feed molar ratio,liquid holdup and reflux ratio on reactive distillation process were investigated.It was found that the mass fraction of ethyl acetate at the top of the column increased with the increase of catalyst dosage,distillation plate number,reaction plate number and trays liquid holdup.The process had the optimum reflux ratio and feed molar ratio.The optimized conditions were as follows: the molar ratio of ionic liquid to acetate acid of 1:2.5,the molar ratio for acetate acid to ethanol of 4:1,the theoretical plate number of 21,the 7th plate for feeding the acetic acid and catalyst,the 19th plate for feeding the ethanol,the trays liquid holdup of 0.1L and the reflux ratio of 4.Under the optimized conditions,the mass fraction of ethyl acetate at the top of the column was 98.73%.
What problem does this paper attempt to address?