Abstract:This work proposes a simulation-based multi objective optimization model for the operation of the product separation process in a methanol to propylene (MTP) plant, striving to enhance the system energy utilization efficiency. The formation of byproducts including an oxygenated hydrocarbon, dimethyl ether (DME), makes the product refining process highly energy-intensive, not only because that the various hydrocarbon byproducts require a long train of distillation columns but also owing to the fact that DME forms azeotrope with product propylene. Furthermore, the formation of oxygenated DME byproduct varies with the catalyst activity, which makes the system more complex. The contribution of this paper is 2-fold. First, it proposes a novel way of DME removal with responsive consumption of extractant methanol according to the DME concentration during one production period. In this way, the energy consumption of the condenser and reboiler of the methanol recovery unit can be expected to decrease by 61.5% and 37.6%, respectively. Second, a simulation-based multiobjective optimizaton framework is introduced to minimize the total heating and cooling costs and maximize the product purity, by integrating a rigorous process simulation model with an intelligent optimization algorithm. Given the characteristics of the MTP production process, three different operation scenarios, namely, the start of run, the designed operation condition, and the end of run, which correspond to different DME concentrations in the system, are covered. The approach is illustrated by its application to a real MTP plant, in which numerical results indicate that the proposed method is capable of identifying appealing operation options, and it can be utilized to support decision-making of the product separation of MTP plants.

Process simulation and optimization of separating aziridine

Simulation and Optimization of Linear Alkylbenzenes Distillation Process

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Process optimization of CO2membrane and cryogenic hybrid separation

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

The Simulation and Optimization of the Tetrafluoroethylene Rectification Process

Process design and intensification of multicomponent azeotropes special distillation separation via molecular simulation and system optimization

Synthesis of Toluene Diamine Separation Process

A simulation study on selection of optimized process for azeotropic separation of methanol and benzene: Internal heat integration and economic analysis

Simulation of extractive distillation process of ethyl acetate—n-hexane system using aspen plus

Simulation and Optimization of Distillation Column Sequence in Large-Scale Ethylene Production

Economic, environmental, energy, exergy (4E) analysis and simulated annealing algorithm optimization of dividing-wall column-intensified heterogeneous azeotropic pressure-swing distillation process

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Process Optimization of Separating C4 by Extractive Distillation

Effect of Thermodynamic Parameters on Prediction of Phase Behavior and Process Design of Extractive Distillation

The Simulate Calculation for the Separation of Ethanol in Azeotrope

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Design and optimization of extractive distillation of benzene– n ‐propanol with ionic liquid as entrainer

Optimal separation of acetonitrile and pyridine from industrial wastewater