Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Extractive Distillation of Ethanol/Water with 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid as a Separating Agent: Process Simulation

Separation of Azeotropic Mixtures (ethanol and Water) Enhanced by Deep Eutectic Solvents

Simulation for Separation of Ethanol and Water by Extractive Distillation

Efficient separation in n‐butyl ether production process from computational thermodynamics to process intensification

Mechanistic Analysis and Process Simulation of Ethyl Acetate-Ethanol Separation by Complex Solvent Extractive Distillation

Modelling and simulation of multicomponent acetone-butanol-ethanol distillation process in a sieve tray column

Ethanol Dehydration with Ionic Liquids from Molecular Insights to Process Intensification

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Screening of ionic liquids as green entrainers for ethanol water separation by extractive distillation: COSMO-RS prediction and aspen plus simulation

Mechanism Analysis for Separation of Cyclohexane and Tert-Butanol System Via Ionic Liquids As Extractants and Process Optimization

Molecular Mechanism and Extraction Performance Evaluation for Separation of Methanol and N-Hexane Via Ionic Liquids As Extractant

Vapor-Liquid Equilibria and Conceptual Design of Extractive Distillation for Separating Ethanol and Ethyl Propionate

Efficient separation of diisopropyl ether and ethanol using green solvents: Thermodynamic analysis and process simulation

Energy-saving exploration and optimization of methyl alcohol – Methyl ethyl ketone – Tertbutyl alcohol separation by extractive dividing-wall distillation with ionic liquid as extractant

Molecular mechanism, liquid–liquid equilibrium and process design of separating octane-n-butanol system by ionic liquids

Economic, Environmental, Energy, Exergy (4E) and Inherent Safety Analysis of Hybrid Extractive-Heteroazeotropic Distillation for Sustainable Treatment of Crude N-Butanol Waste Liquor

Recovery of Biofuel Additives Isopropyl Alcohol and Diisopropyl Ether Using Ionic Liquids with Intermolecular Interactions and Process Design

High-Throughput Computational Screening of Ionic Liquids for Butadiene and Butene Separation

Efficient purification of n-butanol by thermally coupled extractive distillation with mixed entrainer

Molecular Interaction Mechanism and Performance Evaluation in the Liquid-Liquid Extraction Process of Ionic Liquid-Heptane-tertiary Butanol Based on Molecular Dynamics

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol