Abstract:Methyl acetate is considered low toxicity volatile solvent produced either as a by-product during methanol carbonylation or via acetic acid esterification with methanol. In both cases, pure methyl acetate has to be isolated from the reaction mixture. Simulation of methyl acetate separation from its mixture with methanol by extraction distillation was carried out in ASPEN + software. In total three case studies were assumed using two different extraction solvents and two solvent regeneration strategies. In case A, novel extraction solvent 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid, was considered. Raw material separation was achieved in an extraction distillation column while the solvent regeneration was accomplished in a second distillation column in this case. In case study B, the same extraction solvent was used; however, its regeneration was carried out in a single-effect evaporator. Dimethyl sulfoxide was the second extraction solvent selected. Its use in methyl acetate-methanol separation is presented in case study C. As high purity of dimethyl sulfoxide was required for the methyl acetate-methanol azeotrope breaking, its regeneration was carried out in the second distillation column only. To simulate the ternary methyl acetate–methanol–extraction solvent mixtures separation, vapor–liquid equilibrium was predicted based on the NRTL equation. Further, unknown properties of the considered ionic liquid and variation of these properties with temperature were predicted and introduced into the ASPEN + components properties database. Based on these data, optimum operation parameters of the respective separation equipment were established. In all case studies, the same condition had to be fulfilled, namely minimum methyl acetate content in the distillate from the extraction distillation column of 99.5mol-%. Results of simulations using the respective optimum operation parameters were employed in the economic evaluation of the three separation unit designs studied. It was found that the least energy-demanding design corresponds to the case study B in terms of both capital as well as operation expenses.

Hydrolysis of Methyl Acetate and Methanol Mixture in a Catalytic Distillation Column

Study on Hydrolysis of Methyl Acetate in A Catalytic Distillation Column

Experimental Studies on the Catalytic Distillation for Hydrolysis of Methyl Acetate

Hybrid process of distillation side-connected with pervaporation for separation of methanol/MTBE/C4 mixture

Development and application of energy-saving process for methanol to olefins

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Coupled Reaction/Distillation Process for Hydrolysis of Methyl Acetate

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Increase MeOAc conversion in PVA production by replacing the fixed bed reactor with a catalytic distillation column

Process optimization of the catalytic distillation for hydrolysis of methyl acetate | Prozessoptimierung der katalytischen Destillation zur Hydrolyse von Methylacetat

A new process for hydrolysis of methyl acetate

Experimental and simulation studies of a continuous reactive distillation for an esterification process

General model to simulate the catalytic distillation process of methyl acetate hydrolysis | Ein allgemeingueltiges Modell zur Simulation der katalytischen Destillation am Beispiel der Hydrolyse von Methylacetat

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Methyl acetate–methanol mixture separation by extractive distillation: Economic aspects

Process research on the catalytic hydrogenation of methyl acetate to ethanol

Purification of Lactic Acid by Heterogeneous Catalytic Distillation Using Ion-Exchange Resins

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Reaction Kinetics of the Synthesis of Methyl Chloroacetate from Chloroacetic Acid and Methanol

MASS TRANSFER MODEL FOR CATALYST CAPSULE IN CATALYTIC DISTILLATION (II) MENSURATION AND CALCULATION OF EFFECTIVENESS FACTOR

Energy-efficient heterogeneous triple-column azeotropic distillation process for recovery of ethyl acetate and methanol from wastewater