Increase MeOAc conversion in PVA production by replacing the fixed bed reactor with a catalytic distillation column

Jian Xiao,Jiaqi Liu,Juntai Li,Xinghua Jiang,Zhibing Zhang
DOI: https://doi.org/10.1016/S0009-2509(01)00305-0
IF: 4.7
2001-01-01
Chemical Engineering Science
Abstract:Catalytic distillation (CD) technology in hydrolyzing methyl acetate (MeOAc) in polyvinyl alcohol (PVA) production process was studied in this paper. Three operational variables, Rm-mole ratio of feed water to MeOAc, Rf-volume ratio of reflux to feed MeOAc and SV-the ratio of the feed volume flow rate of MeOAc to the volume of catalyst bed, are defined and investigated in detail. Two parameters, Rcon, the conversion of MeOAc, and RA/W, the mass ratio of acetic acid to water in the hydrolysis mixture are also defined. They are used as indices for investigating the performance of the catalytic distillation. As a strong industrial backgrounded project, there is a premise that must be satisfied, that is the RA/W cannot be less than 1.3. According to the experimental results, a set of operational parameters is recommended. The Rm ranges from 2 to 3, the Rf ranges from 3.0 to 5.5 and the SV from 0.25 to 0.55. With the satisfaction of the RA/W, the conversion of MeOAc by CD technology is as high as 56%, which is more than two times that of the fixed bed reactor (FBR) technology. If the RA/W is not taken into account, complete conversion of MeOAc can be achieved easily with a high Rm.
What problem does this paper attempt to address?