Abstract:This work proposes a simulation-based multi objective optimization model for the operation of the product separation process in a methanol to propylene (MTP) plant, striving to enhance the system energy utilization efficiency. The formation of byproducts including an oxygenated hydrocarbon, dimethyl ether (DME), makes the product refining process highly energy-intensive, not only because that the various hydrocarbon byproducts require a long train of distillation columns but also owing to the fact that DME forms azeotrope with product propylene. Furthermore, the formation of oxygenated DME byproduct varies with the catalyst activity, which makes the system more complex. The contribution of this paper is 2-fold. First, it proposes a novel way of DME removal with responsive consumption of extractant methanol according to the DME concentration during one production period. In this way, the energy consumption of the condenser and reboiler of the methanol recovery unit can be expected to decrease by 61.5% and 37.6%, respectively. Second, a simulation-based multiobjective optimizaton framework is introduced to minimize the total heating and cooling costs and maximize the product purity, by integrating a rigorous process simulation model with an intelligent optimization algorithm. Given the characteristics of the MTP production process, three different operation scenarios, namely, the start of run, the designed operation condition, and the end of run, which correspond to different DME concentrations in the system, are covered. The approach is illustrated by its application to a real MTP plant, in which numerical results indicate that the proposed method is capable of identifying appealing operation options, and it can be utilized to support decision-making of the product separation of MTP plants.

General model to simulate the catalytic distillation process of methyl acetate hydrolysis | Ein allgemeingueltiges Modell zur Simulation der katalytischen Destillation am Beispiel der Hydrolyse von Methylacetat

Process optimization of the catalytic distillation for hydrolysis of methyl acetate | Prozessoptimierung der katalytischen Destillation zur Hydrolyse von Methylacetat

General mathematical model and its solution for catalytic distillation columns

Modeling and Simulation of Commercial Catalytic Reformers

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

THE MATHEMATICAL SIMULATION OF AN ETHOXYLATION TUBULAR REACTOR

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Study on Hydrolysis of Methyl Acetate in A Catalytic Distillation Column

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Experimental Studies on the Catalytic Distillation for Hydrolysis of Methyl Acetate

Hydrolysis of Methyl Acetate and Methanol Mixture in a Catalytic Distillation Column

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Simulation of Catalytic Distillation Process for Cumene Synthesis

MASS TRANSFER MODEL FOR CATALYST CAPSULE IN CATALYTIC DISTILLATION (II) MENSURATION AND CALCULATION OF EFFECTIVENESS FACTOR

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Modelling and simulation of multicomponent acetone-butanol-ethanol distillation process in a sieve tray column