Abstract:Carbon fiber fabric-reinforced poly(ether ether ketone) (CFF-PEEK) composites exhibit exceptional mechanical properties, and their flexibility and conformability make them a promising alternative to traditional prepregs. However, the formation of the CFF-PEEK composite is trapped in the high viscosity of PEEK, the smooth surface, and tightly interwoven bundles of CFF. It is more difficult for the resin to flow through the fibers of complex textile structures. Here, a simple film stacking method using the hot-pressing process of plain-woven CFF-PEEK thermoplastic composites is discussed. The uniform distribution of PEEK resin between each layer of CFF reduces the flow distance during the molding process, preventing defects in the composite material effectively. Four process parameters, including molding temperature (370, 385, 400, and 415 °C), molding pressure (1, 2, 4, 8, and 10 MPa), molding time (10, 20, 30, 40, 60, and 90 min), and pre-compaction process, are considered. Interlaminar shear strength (ILSS), tensile strength, and flexural strength of CFF/PEEK composites are evaluated to optimize the process parameters. Moreover, ultrasonic scanning microscopy and scanning electron microscopy are employed to observe the formation quality and microscopic failure modes of CFF/PEEK composites, respectively. The ultimate process parameters are a molding temperature of 410 °C, molding pressure of 10 MPa, molding time of 60 min, and the need for the pre-compaction process. Under the best process parameters, the ILSS is 62.5 MPa, the flexural strength is 754.4 MPa, and the tensile strength is 796.1 MPa. This work provides valuable insight for studying the process parameters of fiber fabric-reinforced thermoplastic polymer composites and revealing their impact on mechanical properties.

Study on Processing Parameters of Tape Placement for Continuous GF Reinforced PP Laminates

STUDY ON PROCESSING PARAMETERS OF TAPE PLACEMENT FOR CONTINUOUS GF REINFORCED PPS

Analysis and Characterization of Interlaminar Tack for Different Prepreg Materials During Automated Fiber Placement

STUDY ON LAMINATING PROCESS OF CONTINUOUS FIBER REINFORCED POLYPROPYLENE PREPARED BY HYBRID YARN FABRIC

Study on Temperature Parameters of Filament Winding of Glass Fiber Reinforced Polypropylene Pipes

The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process

The Effects of Laser-Assisted Winding Process Parameters on the Tensile Properties of Carbon Fiber/Polyphenylene Sulfide Composites

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Study on impregnation parameters in preparation of CFF/PEEK laminates

The combined effect of impregnated rollers configuration and glass fibers surface modification on the properties of continuous glass fibers reinforced polypropylene prepreg composites

Effects of the Pre-Consolidated Materials Manufacturing Method on the Mechanical Properties of Pultruded Thermoplastic Composites

Preparation Process of Continuous CF Reinforced PEEK Composite Laminates

A Study on Hot Stamping Formability of Continuous Glass Fiber Reinforced Thermoplastic Composites

Parametric Optmisation of Pin-assisted-melt Impregnation of Glass Fiber/Polypropylene by Taguchi Method

Effects of Process Parameters in Thermoforming of Unidirectional Fibre-Reinforced Thermoplastics

Effect of molding process parameters on the mechanical properties of CGFRPP products

Influence and optimization of parameters of prepreg viscosity during placement

Study on the Preparation and Process Parameter-Mechanical Property Relationships of Carbon Fiber Fabric Reinforced Poly(Ether Ether Ketone) Thermoplastic Composites

Formability and Failure Mechanisms of Continuous Glass Fiber-Reinforced Polypropylene Composite Laminates in Thermoforming Below the Melting Temperature

Effect of high quality hybrid coatings and coating condition on the properties of continuous glass fiber reinforced polypropylene prepreg composites

Surface Quality and ILSS of Glass Fiber Reinforced Polypropylene Composite Pipe Prepared by Filament Winding