Abstract:Thermal storage cement-based materials, formed by integrating phase change materials into cementitious materials, exhibit significant potential as energy storage materials. However, poor thermal conductivity severely limits the development and application of these materials. In this study, an amorphous SiO2 shell is encapsulated on a graphite surface to create a novel thermally modified admixture (C@SiO2). This material exhibits excellent thermal conductivity, and the surface-encapsulated amorphous SiO2 enhances its bond with cement. Further, C@SiO2 was added to the thermal storage cement-based materials at different volume ratios. The effects of C@SiO2 were evaluated by measuring the fluidity, thermal conductivity, phase change properties, temperature change, and compressive strength of various thermal storage cement-based materials. The results indicate that the newly designed thermal storage cement-based material with 10 vol% C@SiO2 increases the thermal conductivity coefficient by 63.6% and the latent heat of phase transition by 11.2% compared to common thermal storage cement-based materials. Moreover, C@SiO2 does not significantly impact the fluidity and compressive strength of the thermal storage cement-based material. This study suggests that C@SiO2 is a promising additive for enhancing thermal conductivity in thermal storage cement-based materials. The newly designed thermal storage cement-based material with 10 vol% C@SiO2 is a promising candidate for energy storage applications.

Study on Compressive Strength and Thermal Properties of New Cementitious Thermal Storage Material

Mechanical and Thermal Properties of Cement Composite Graphite for Solar Thermal Storage Materials

Study of Cement-Based Thermal Storage Materials with Fly Ash

Enhanced Performance of High Temperature Aluminate Cementitious Materials Incorporated with Cu Powders for Thermal Energy Storage

Influence of polycarboxylate on thermal properties of cementitious solarthermal storage materials

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Thermal and Mechanical Properties of Aluminate Cementitious Functional Materials Enriched with Nano-Sio2 for Thermal Energy Storage

Thermal Properties of Nano-Sio2 Optimized Aluminate Cementitious Composite Cu Powders

Investigation on the influence of fine steel fiber and carbon fiber on the thermo-mechanical properties of cement-based thermal energy storage mortar

Experimental Study on Preparation of a Novel Foamed Cement with Paraffin/ Expanded Graphite Composite Phase Change Thermal Energy Storage Material

Influence of nano-ZrO2 on the mechanical and thermal properties of high temperature cementitious thermal energy storage materials

Effect of Nano-Mgo on Thermal and Mechanical Properties of Aluminate Cement Composite Thermal Energy Storage Materials

Preparation and Characterization of Graphite–SiO2 Composites for Thermal Storage Cement-Based Materials

Influence of Fe Powders Replacing Cu Powders on the Thermal and Mechanical Properties of Aluminate Cementitious Thermal Energy Storage Materials at High Temperature

Investigations on the Preparation and Mechanical Properties of the Nano-Alumina Reinforced Cement Composite

Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material

Development And Design Of Composite Cementitious Material At Long-Time Circular Elevated Temperature In Metallurgy Environment

Influence of Cu Powders on the Properties and Characteristics of Nano-Mgo Based Aluminate Cementitious Materials

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Preparation and characteristics of n-nonadecane/cement composites as thermal energy storage materials in buildings

A study on the hydration of calcium aluminate cement pastes containing silica fume using non-contact electrical resistivity measurement