Abstract:Thermal storage cement-based materials, formed by integrating phase change materials into cementitious materials, exhibit significant potential as energy storage materials. However, poor thermal conductivity severely limits the development and application of these materials. In this study, an amorphous SiO2 shell is encapsulated on a graphite surface to create a novel thermally modified admixture (C@SiO2). This material exhibits excellent thermal conductivity, and the surface-encapsulated amorphous SiO2 enhances its bond with cement. Further, C@SiO2 was added to the thermal storage cement-based materials at different volume ratios. The effects of C@SiO2 were evaluated by measuring the fluidity, thermal conductivity, phase change properties, temperature change, and compressive strength of various thermal storage cement-based materials. The results indicate that the newly designed thermal storage cement-based material with 10 vol% C@SiO2 increases the thermal conductivity coefficient by 63.6% and the latent heat of phase transition by 11.2% compared to common thermal storage cement-based materials. Moreover, C@SiO2 does not significantly impact the fluidity and compressive strength of the thermal storage cement-based material. This study suggests that C@SiO2 is a promising additive for enhancing thermal conductivity in thermal storage cement-based materials. The newly designed thermal storage cement-based material with 10 vol% C@SiO2 is a promising candidate for energy storage applications.

Influence of Cu Powders on the Properties and Characteristics of Nano-Mgo Based Aluminate Cementitious Materials

Enhanced Performance of High Temperature Aluminate Cementitious Materials Incorporated with Cu Powders for Thermal Energy Storage

Effect of Nano-Mgo on Thermal and Mechanical Properties of Aluminate Cement Composite Thermal Energy Storage Materials

Thermal Properties of Nano-Sio2 Optimized Aluminate Cementitious Composite Cu Powders

Influence of Fe Powders Replacing Cu Powders on the Thermal and Mechanical Properties of Aluminate Cementitious Thermal Energy Storage Materials at High Temperature

Thermal and Mechanical Properties of Aluminate Cementitious Functional Materials Enriched with Nano-Sio2 for Thermal Energy Storage

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

The Effect of Nanoparticles on the Properties of Calcium Aluminate Cement Pastes at High Temperatures

Influence of nano-ZrO2 on the mechanical and thermal properties of high temperature cementitious thermal energy storage materials

Eff ects of Diff erent Mechanical Alloying Parameters on Microstructure of High Temperature Nanocrystalline Cu-Ta Alloys

Study of Cement-Based Thermal Storage Materials with Fly Ash

Study on Compressive Strength and Thermal Properties of New Cementitious Thermal Storage Material

Mechanical and Thermal Properties of Cement Composite Graphite for Solar Thermal Storage Materials

The Role of Graphene Oxide in the Exothermic Mechanism of Al/CuO Nanocomposites

Influence of polycarboxylate on thermal properties of cementitious solarthermal storage materials

The Mechanical Properties and Mechanisms in Contact-Hardening Behavior of Silica-Alumina Mine Solid Waste

Low-temperature sintering of Al2O3 ceramics doped with 4CuO-TiO2-2Nb2O5 composite oxide sintering aid

Effect of magnesia and silica additives on properties of aluminium titanate ceramic

Effect of Fe2O3–TiO2-Sm2O3 composite additive on sintering behavior and thermal properties of Al2O3 ceramics for thermal storage

Preparation and Characterization of Graphite–SiO2 Composites for Thermal Storage Cement-Based Materials

Study of the Aid Effect of CuO-TiO2-Nb2O5 on the Dielectric and Structural Properties of Alumina Ceramics