Abstract:Herein, a strategy of embedding in‐situ polymethyl‐methacrylate (PMMA) domains in polydimethylsiloxane (PDMS) networks is proposed to enhance adhesive and damping properties of addition type silicone rubber (SR). PMMA domains improve the modulus of SR (at room temperature), which is stronger correlated to its adhesive performance, according to the Griffith criterion. Besides, the damping performance at high temperature is provided by the glass transition of thermoplastic PMMA. The PMMA/SR blends are obtained by the crosslink of PMMA and vinyl‐terminated polydimethylsiloxane (vi‐PDMS) liquid blends with polymethylhydrosiloxane, and the PMMA/vi‐PDMS liquid blends are prepared by in‐situ radical polymerization of methyl‐methacrylate (MMA) in vi‐PDMS with toluene as compatibilizer. Effects of disperse speed, compatibilizer content, and PMMA proportion on the morphologies and properties of PMMA/SR blends are studied. Small PMMA domains (around 800 nm) in PMMA/vi‐PDMS blends with narrow size distribution and well dispersion are formed at appropriate disperse speed (100–300 rpm) and abundant compatibilizer content (~100 wt% refers to vi‐PDMS). The blends with 20 wt% PMMA possess tensile strength over 8 MPa and lap shear strength over 5 MPa to stainless steel. And the blends with 50 wt% PMMA show good damping properties with tan δ over 0.15 at temperature range from −50 to 150°C. Tg‐PMMA moves slightly to lower temperature with less PMMA embedded, but Tg‐PDMS remained stable relatively.

Damping and Adhesion Properties of PMMA/EMA-GMA Blends

Studies on Thermomechanical Characteristics of Poly(Methyl Methacrylate) and Ethylene-Methyl Acrylate Copolymer Blends

Compatibility and Thermal Properties of Poly(acrylonitrile–butadiene–styrene) Copolymer Blends with Poly(methyl Methacrylate) and Poly(styrene‐co‐acrylonitrile)

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Blends of poly(methyl methacrylate) (PMMA) with PMMA ionomers: Mechanical properties

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Dynamic Mechanical Analysis of High Gloss PC/PMMA Composites

Influence of Methyl Methacrylate-Co-glycidyl Methacrylate Copolymers on the Compatibility, Morphology and Mechanical Properties of Poly(butylene Terephthalate) and Polycarbonate Blends

Preparation, Mechanical and Thermal Properties of PLA/PBAT/EGMA Blends

Investigation of the Properties of PBT/ABS-g-GMA Blends Modified with Epoxy Resin of Mid-Molecular Weights

Role of in‐situ polymethyl‐methacrylate in addition type silicone rubber with specific reference to adhesion and damping properties

Influence of EVA-g-MAH Compatibilizer on Adhesion Strength, Mechanical Properties and Thermal Behavior of EVA/SBS Hot Melt Adhesive Blends

PMMA-driven morphology modification and dramatic improvement in ductility for PVDF/PLA blends

Characterization of the Phase-Separation in Pmma/Alpha-Msan Blends Using the Dynamic Viscoelastic Functions

Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends

Rheological, flame retardancy, and thermomechanical properties of polymethyl methacrylate composites: Effects of flame retardant and toughener

Polyamide 6/maleated ethylene-propylene-diene rubber/organoclay composites with or without glycidyl methacrylate as a compatibilizer

Preparation and Properties of PMMA Blends with High Toughness

Compatibilization Effect of MMA-co-GMA Copolymers on the Properties of Polyamide 6/poly(vinylidene Fluoride) Blends

Mechanical, Thermal, and Rheological Properties of EPDM-graft-methyl Methacrylate and Styrene (Epdm-G-ms)/methyl Methacrylate-Styrene Copolymer (MS Resin) Blends

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer