Abstract:Styrene (St) was used as comonomer and glycidyl methacrylate (GMA) as grafting monomer to prepare SEBS-g-(GMA-co-St) graft copolymers via melt grafting. Then, the graft copolymers were employed as a compatibilizer for melt blending polypropylene (PP) and hydrogenated styrene-butadiene-styrene (SEBS) triblock copolymers. The effects of the amount of GMA in the graft copolymers on thermal properties, rheology, crystallization, optical and mechanical properties, and microstructure of the blends were investigated. The results show that GMA and St were successfully grafted onto SEBS. The GMA amount in the graft copolymer significantly influenced the comprehensive properties of PP/SEBS/SEBS-g-(GMA-co-St) blends. The epoxy groups of GMA reacted with PP and SEBS, forming interfacial chemical bonds, thereby enhancing the compatibility between PP and SEBS to varying extents. After introducing SEBS-g-(GMA-co-St) into PP/SEBS blends, crystallinity decreased, crystal size increased while transmittance remained above 91% with rising GMA amount in the graft copolymers, indicating excellent optical properties. Notched impact strength and elongation at break of the blends showed a trend of first increasing and then decreasing with increased amounts of GMA in the graft copolymers. When the amount of GMA in the graft copolymers was 3 wt%, the blends exhibited optimal toughness with notched impact strength and elongation at break of 30,165.82 J/m2 and 1445.40%, respectively. This was attributed to the tightest dispersion interface adhesion and maximum matrix plastic deformation, consistent with the mechanical performance results.

Mechanical, Thermal, and Rheological Properties of EPDM-graft-methyl Methacrylate and Styrene (Epdm-G-ms)/methyl Methacrylate-Styrene Copolymer (MS Resin) Blends

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Study on Syntheses and Properties of 2,2?-Mercaptoethylsulfide Dimethacrylate Transparent Homo- and Copolymer Resins Having High Refractive Index

Melt Grafting of Vinyltrimethoxysilane and Water Crosslinking of Polypropylene/Ethylene-Propylene Diene Terpolymer Blends

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Influence of Epoxy Resin on the Morphological and Rheological Properties of PBT/ABS Blends Compatibilized by ASMA

Synthesis and Characterization of a Liquid Crystalline Epoxy Containing Azomethine Mesogen for Modification of Epoxy Resin

Characterization of chemical structure and morphology of MCS graft terpolymer

Response Surface Analysis of PS/EPDM/PA6 Ternary Blends: Effect of Mixing Sequence, Composition, and Viscosity Ratio on the Mechanical Properties

Synthesis of Monodisperse Mesoporous Carbon Spheres/EPDM Rubber Composites and Their Enhancement Mechanical Properties

The Effect of Functionalized SEBS on the Properties of PP/SEBS Blends

Studies on Thermomechanical Characteristics of Poly(Methyl Methacrylate) and Ethylene-Methyl Acrylate Copolymer Blends

Constituent compatibility and physical properties of bio‐based EUG/EPDM blends

Rheological, flame retardancy, and thermomechanical properties of polymethyl methacrylate composites: Effects of flame retardant and toughener

Mechanical Properties and Mullins Effect of Ethylene Propylene Diene Monomer Vulcanizes Reinforced with Silica Powders with Different Micropore Structures

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Investigation of the Properties of PBT/ABS-g-GMA Blends Modified with Epoxy Resin of Mid-Molecular Weights

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer