Abstract:A strategy for optimizing the rolling resistance, wet skid and cut resistance of reinforced rubber simultaneously using a supramolecular filler is demonstrated. A β-alanine trimer-grafted Styrene Butadiene Rubber (A3-SBR) pristine polymer was designed and mechanically mixed with commercially available styrene butadiene rubber to help the dispersion of a β-alanine trimer (A3) supramolecular filler in the rubber matrix. To increase the miscibility of A3-SBR with other rubber components during mechanical mixing, the pristine polymer was saturated with ethanol before mixing. The mixture was vulcanized using a conventional rubber processing method. The morphology of the assembles of the A3 supramolecular filler in the rubber matrix was studied by Differential Scanning Calorimetry (DSC) and Transmission Electron Microscopy (TEM). The Differential Scanning Calorimetry study showed that the melting temperature of β-sheet crystals in the vulcanizates was around 179 °C and was broad. The melting temperature was similar to that of the pristine polymer, and the broad melting peak likely suggests that the size of the crystals is not uniform. The Transmission Electron Microscopy study revealed that after mixing the pristine polymer with SBR, some β-sheet crystals were rod-like with several tens of nanometers and some β-sheet crystals were particulate with low aspect ratios. Tensile testing with pre-cut specimens showed that the vulcanizate containing A3-SBR was more cut-resistant than the one that did not contain A3-SBR, especially at a large cut size. The rolling resistance and wet skid were predicted by dynamic mechanical analysis (DMA). DMA tests showed that the vulcanizates containing A3-SBR were significantly less hysteretic at 60 °C and more hysteretic at 0 °C based on loss factor. Overall, the "magic triangle" was expanded by optimizing the rolling resistance, wet-skid, and cut resistance simultaneously using a β-alanine trimer supramolecular filler. The Payne effect also became less severe after introducing the β-alanine trimer supramolecular filler into the system.

Role of in‐situ polymethyl‐methacrylate in addition type silicone rubber with specific reference to adhesion and damping properties

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Application of solubility parameters in the preparation of PMMA with permanent antistatic, high toughness, and excellent optical properties

Effect of silane coupling agent grafted glycidyl methacrylate on hollow microsphere/natural rubber composites

PMMA-driven morphology modification and dramatic improvement in ductility for PVDF/PLA blends

Preparation and Characterization of Silica/Pmma Composites with Highly Dispersed Silica Nanoparticles Dispersion of Nanosilica in Mma

The Mechanical Properties of Silicone Rubber Composites with Shear Thickening Fluid Microcapsules

Rheological, flame retardancy, and thermomechanical properties of polymethyl methacrylate composites: Effects of flame retardant and toughener

Molecular dynamics simulation for damping properties of PDMS composite enhanced by the last generation siloxane dendrimer alcohol with hydroxyl terminal groups

The synthesis, characterization and properties of silicone adhesion promoters for addition-cure silicone rubber

Selective Distribution of Silica Grafted with Crosslinked Poly(methyl Methacrylate) in Poly(methyl Methacrylate)/poly (Styrene-Co-acrylonitrile) Blend

Improved Thermal Insulation and Mechanical Strength of Styrene-Butadiene Rubber through the Combination of Filled Silica Aerogels and Modified Glass Fiber

Mechanical Properties and Molecular Adhesion Exhibited by Inorganic‒Organic Composite Elastomers

Effects of modified silica on the co‐vulcanization kinetics and mechanical performances of natural rubber/styrene–butadiene rubber blends

Synthesis and application of adhesion promoter containing phenolic hydroxyl/acrylate groups for addition-cure liquid silicone rubber

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide-based oligosiloxane as a promising damping additive for methyl vinyl silicone rubber (VMQ)

Expanding the "Magic Triangle" of Reinforced Rubber Using a Supramolecular Filler Strategy

Modification of microspheres and matrix to improve mechanical properties, thermal stability, and viscosity of thermal insulation composites

Adhesion enhancement between aluminum and butyl rubber by (3-mercaptopropyl) trimethoxy silane for vibration damping plate

Crystallization behavior of PVDF/PMMA blends prepared by in situ polymerization from DMF and ethanol

Enhanced flexibility and ablative performance of silicone rubber by constructing an interpenetrating zirconium-containing polysiloxane double network