Abstract:Thermal interface materials (TIMs) are indispensable materials in thermal management, and Al2O3-based TIMs are most widely used in thermal managements. Surface modification is an effective method to improve Al2O3 dispersion in matrix, thereby increasing the maximum filler loading. However, traditional surfactants hardly promote the interfacial heat-transfer on the premise of the same filler loading. In this work, we proposed an electrostatic self-assembly strategy to functionalize the surface of Al2O3 particles with MXene sheets to enhance the interfacial heat-transfer between fillers and silicone rubber (SR). To validate the effectiveness of MXene, we compared the Al2O3-MXene-SR TIM with Al2O3-graphene-SR TIM and Al2O3-SR TIM under the same Al2O3 loading in the aspects of mechanical properties and thermal properties. Though MXene could increase the viscosity and hardness, the negative influence of MXene is much weaker than that of graphene. Nevertheless, the positive impact of MXene is more significant. First, it can reinforce the mechanical strength. The experiment showed the breaking tensile strength of the Al2O3-MXene-SR TIM is 0.117 MPa, higher than that of the Al2O3-graphene-SR TIM (0.082 MPa) and the Al2O3-SR TIM (0.07 MPa). Second, the thermal conductivity of TIMs improves a lot after MXene coating. The thermal conductivity of Al2O3-MXene-SR TIM is 3.4 W·m−1·K−1, with the matrix/filler mass ratio of 100:1600, which is 30% higher than that of the Al2O3-SR TIM (2.6 W·m−1·K−1) and 21% higher than that of Al2O3-Gr-SR TIM (2.8 W·m−1·K−1). Whereas the Al2O3 loading keeps the same and the MXene fraction is only about 1.16 vol‰, the increment of the thermal conductivity is mostly due to the improvement of interfacial heat-transfer via MXene. The temperature cycling test and aging test implied that the Al2O3-MXene-SR TIM is thermally stable and reliable. The underlying mechanism of the interfacial heat-transfer enhancement was revealed by the analysis of phonon density of states (PDOS) via a molecular dynamics simulation. The PDOS of MXene is more compatible with Al2O3 and SR than graphene, so MXene sheets play the role as a bridge between Al2O3 and SR to improve the interfacial phonon transport. This work provides an effective method to reduce interfacial thermal resistance in TIMs, which could facilitate the development of thermal management materials.

Modification of microspheres and matrix to improve mechanical properties, thermal stability, and viscosity of thermal insulation composites

Surface Modification of Halloysite/Sericite

Synergistic Effects between Multiphase Thermal Insulation Functional Phases on the Mechanical and Heat Insulation Properties of Silicone Rubber Composites

Preparation and heat resistance of hollow glass microbead/silicone rubber composite coating

Interface optimization of silicone rubber/molybdenum disulfide composites for enhanced mechanical and thermal properties

Hollow glass microspheres/silicone rubber composite materials toward materials for high performance deep in-situ temperature-preserved coring

Preparation of hollow silica microsphere and its effect on the thermal conductivity of polymer composites

Synthesis and Characterization of Double-Shell Structure Hollow SiO2 Nanospheres

Enhanced interfacial heat-transfer of Al2O3-MXene-silicone composite via an electrostatic self-assembly strategy

Intercalation of silsesquioxane surfactant in layered double hydroxide for silicone rubber composites: Enhancing interfacial interactions toward improvement of mechanical, thermal, and gas barrier properties

Modified hollow glass microsphere isocyanate-based polyimide foam composite with improved mechanical and thermal insulation properties

Enhanced mechanical, thermal performance and kinetics of thermal degradation of silicone rubber/ethylene–vinyl acetate copolymer/halloysite nanoclay nanocomposites compatibilized by ethylene–acrylic acid copolymer

Mechanical Properties, Fire Performance and Thermal Stability of Magnesium Hydroxide Sulfate Hydrate Whiskers Flame Retardant Silicone Rubber

Novel hybrid silicone resin composites with excellent low dielectric and high temperature mechanical properties

Improving thermal insulation properties of lightweight epoxy resin matrix composites with millimeter-sized hollow glass microspheres/epoxy hollow spheres

Simultaneous improvement of interfacial bonding and thermal resistance of carbonaceous fiber/silicone composite coatings modified with aniline-methyl-triethoxysilane

Mechanical and thermal properties of synergistic modification of bismaleimide polymer composites with nano‐SiO2 and hyperbranched polyimide

Role of in‐situ polymethyl‐methacrylate in addition type silicone rubber with specific reference to adhesion and damping properties

Effects of hollow glass microspheres on the polybenzoxazine thermosets: Mechanical, thermal, heat insulation, and morphological properties

Surface modification of spherical silica micro‐powder using silane coupling agents and their application in epoxy resin‐based composite materials

Ceramicization mechanism and thermal insulation/ablative properties of hollow microspheres/boron phenolic composites