Synergistic function of bentonite, poly-aluminum chloride, and cationic polyacrylamide to realize highly efficient coagulation-flocculation process for leachate treatment
Xinda Yang,Ming Zeng,Linlin Hao,Chang Wang
DOI: https://doi.org/10.5004/dwt.2021.27890
IF: 1.1
2021-01-01
Desalination and Water Treatment
Abstract:This work introduces a coagulation–flocculation leachate treatment process using colloidal inorganic bentonite particles. The synergistic effect of the inorganic mineral bentonite, poly-aluminum chloride (PAC), and cationic polyacrylamide (C-PAM) was investigated. The results demonstrate that the traditional combination of PAC and C-PAM had a certain coagulation–flocculation effect on the treatment of leachate. However, most flocs in this treatment floated and were difficult to separate. The colloidal bentonite disrupted the ionic balance of the leachate and led to a synergistic effect with PAC and C-PAM. When 8 g/L, 32 mL/L, and 20 mL/L of bentonite, PAC, and C-PAM were used, the removal efficiency of chemical oxygen demand, turbidity, suspended solids, and total phosphorus in the supernatant reached 72.3%, 97.6%, 93.8%, and 97.5%, respectively. The zeta potential dropped from –40.1 to –2.37 mV with the addition of colloidal bentonite, indicating that through electric neutralization and destabilization, pollutants in the leachate were adsorbed and trapped. Even though the average size of the floc decreased from 1,298 to 1,119 μm, the flocs became tighter and had higher specific gravities, allowing them to precipitate more rapidly and increasing the volume ratio of the supernatant. The floating flocs rapidly settled and the floc volume ratio was only 7.2%. The addition of bentonite effectively promoted the coagulation–flocculation effect. Overall, this work demonstrates that bentonite significantly improves coagulation–flocculation treatment and provides a strong scientific basis for the establishment of subsequent biological treatment processes.
engineering, chemical,water resources