Enhanced Pollutant Removal and Antifouling in an Aerobic Ceramic Membrane Bioreactor with Bentonite for Pharmaceutical Wastewater Treatment
Salaheddine Elmoutez,Hafida Ayyoub,Mohamed Chaker Necibi,Azzedine Elmidaoui,Mohamed Taky
DOI: https://doi.org/10.3390/membranes14100205
IF: 4.562
2024-09-27
Membranes
Abstract:This study examined the impact of adding bentonite clay (concentration of 1.5 to 10 g/L) to a pilot-scale aerobic ceramic membrane bioreactor (AeCMBR) for treating pharmaceutical wastewater (PhWW). The hydraulic retention time (HRT) was maintained at 24 h; the dissolved oxygen was between 2 mg/L (on) and 4 mg/L (off) throughout operation. Organic and nitrogen pollution removal rates and heavy metal (Cu, Ni, Pb, Zn) reduction rates were assessed. The chemical oxygen demand (COD) removal efficiency exceeded 82%. Adsorption improved ammonia (NH4+) removal to 78%; the addition of 5 g of bentonite resulted in a 38% improvement compared with the process without bentonite. The average nitrate concentration decreased from 169.69 mg/L to 43.72 mg/L. The average removal efficiencies for Cu, Ni, Pb and Zn were 86%, 68.52%, 46.90% and 56.76%, respectively. Bentonite at 5 g/L significantly reduced membrane fouling. The cost–benefit analysis enabled us to predict that the process will meet the multiple objectives of durability, treatment performance and economic viability. The combination of an AeCMBR and bentonite adsorption has proven to be a valuable solution for treating highly polluted wastewater.
engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical