Abstract:Dyes used in textiles, foods, cosmetics, and chemicals have become a major environmental pollution issue around the world. To address this issue, a number of technologies have been created to remove these pollutants from the environment. Due to their superior properties at nanoscale, numerous nanomaterials have been applied to remove dyes from polluted waters. This research presents the findings of the development of bentonite nano zero-valent iron (B-nZVI) for the treatment of synthetic cationic dyes. This study has three objectives: (i) to produce bentonite nano zero-valence iron (B-nZVI), (ii) to characterize its adsorbents (B-nZVI), (iii) to characterize its adsorption capacity. Four main tests were used for this purpose: (i) a physical test (Brunauer–Emmett–Teller (BET) surface area), (ii) a chemical test (cation exchange capacity (CEC) and X-ray fluorescence (XRF)), (iii) morphology (field emission scanning electron microscopy (FESEM) and (iv) mineralogy (Fourier transform infrared spectroscopy (FTIR). The five factors for the batch equilibrium test are adsorbent dose, concentration, kinetic, pH, and temperature. The batch test showed that the optimum dose for all adsorbents is 0.5 g. For the concentration factor, B-nZVI exhibits larger adsorption capacity (KL = 30,314.0536 L/g; R2 = 1) compared to bentonite (Kd = 0.0219 L/g; R2 = 0.8892). The kinetic factor showed that the adsorption capacity by pseudo-second-order model was the best for both adsorbents (qe = 1.2038 mg/g, R2 = 0.9993 for bentonite and qe = 6.9979 mg/g, R2 = 1 for B-nZVI). For B-nZVI, the interparticle diffusion model (Kf = 0.8645 m2 g−1 min L−1; R2 = 0.9) and intraparticle diffusion model (Kd = 2.3829 m2 g−1 min L−1; R2 = 0.9189) showed a good correlation with the adsorption data, while bentonite showed a lower correlation with the interparticle diffusion model (Kf = 0.0002 m2 g−1 min L−1; R2 = 0.6253) and intraparticle diffusion model (Kd = 0.2886 m2 g−1 min L−1; R2 = 0.6026), respectively. The pH factor showed that the adsorption capacity of bentonite (qe = 0.5674 mg/g) and B-nZVI (qe = 5.3284 mg/g) was highest in acidic conditions (pH 2). As for the temperature factor, there was no significant effect on bentonite and B-nZVI. Therefore, tests can be conducted at room temperature, saving energy. It was also concluded that B-nZVI is the best material for removing MB compared to bentonite and can be considered for the treatment materials of contaminated water.

Treatment of Dye Wastewater by Adsorption with BentoniteSupported Magnetic Materials

Treatment of Dye Wastewater by Bentonite Adsorption and Catalysis

Enhancement Effect of Ctab in Dye Wastewater Treatment by Bentonite

Self-immobilization of a Magnetic Biosorbent and Magnetic Induction Heated Dye Adsorption Processes

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Enhanced adsorption of dye on magnetic Fe3O4 via HCl-assisted sonication pretreatment

Efficient wastewater decontamination using magnetic bentonite-alginate beads: A comprehensive study of adsorption dynamics, regeneration, and molecular interactions

Study on the coagulation treatment of activated dye wastewater

Treatment of Dye Wastewater by Nano-Ferrous Modified Bentonite Assisted Advanced Oxidation Processes

Binary comparative study adsorption of anionic and cationic Azo-dyes on Fe3O4-Bentonite magnetic nanocomposite: Kinetics, Equilibrium, Mechanism and Thermodynamic study

Simultaneous Removal of Acid Dye and Cationic Surfactant from Water by Bentonite in One-Step Process

Adsorption Of Anionic Dye By Magnesium Hydroxide-Modified Diatomite

Porous polymer magnetic adsorbents for dye wastewater treatment

Treating Dye Wastewater of Reactive Brilliant Red K-2bp by Cetyltrimethylammonium Chloride-Modified Bentonite with Polyacrylamide Flocculant

Mechanism of Adsorption of Anionic Dye from Aqueous Solutions Onto Organobentonite.

Highly efficient removal of dyes from wastewater over a wide range of pH value by a self-adaption adsorbent

Treatment of Dye Wastewater by Zero Valent Iron Composited Organobentonite

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Magnesium oxide modified diatomite waste as an efficient adsorbent for organic dye removal: adsorption performance and mechanism studies

Preparation of polyethylenimine and carboxymethyl cellulose co-modified magnetic bentonite for enhanced adsorption of Pb(II) and Cd(II) based on the concept of mesh bag and octopus-like tentacle

Adsorption of Methylene Blue by Bentonite Supported Nano Zero Valent Iron (B-nZVI)