Abstract:This work aims to enhance the adsorption performance of Laponite @diatomite for organic pollutants by modifying it with cetyltrimethylammonium bromide (CTAB). The microstructure and morphology of the CTAB-modified Laponite @diatomite material were characterized using SEM, XRD, FTIR, BET, and TG. Furthermore, the influences of key parameters, containing pH, adsorbent dosage, reaction time, and reaction temperature, on the adsorption process were investigated. The kinetics, thermodynamics, and isotherm models of the adsorption process were analyzed. Finally, potential adsorption mechanisms were given based on the characterization. The research findings indicate that CTAB-La@D exhibits good adsorption performance toward Congo red (CR) over a broad pH range. The maximum adsorption capacity of CR was 451.1 mg/g under the optimum conditions (dosage = 10 mg, contact time = 240 min, initial CR concentration = 100 mg/L, temperature = 25 °C, and pH = 7). The adsorption process conformed to the pseudo-second-order kinetic model, and the adsorption isotherms indicated that the adsorption process of CR was more in line with the Langmuir model, and it was physical adsorption. Thermodynamic analysis illustrates that the adsorption process is exothermic and spontaneous. Additionally, the mechanisms of electrostatic adsorption and hydrophobic effect adsorption of CR were investigated through XPS and FTIR analysis. This work provides an effective pathway for designing high-performance adsorbents for the removal of organic dye, and the synthesized materials hold great capability for practical utilization in the treatment of wastewater.

Enhancement Effect of Ctab in Dye Wastewater Treatment by Bentonite

Treatment of Dye Wastewater by Adsorption with BentoniteSupported Magnetic Materials

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Simultaneous Removal of Acid Dye and Cationic Surfactant from Water by Bentonite in One-Step Process

Treating Dye Wastewater of Reactive Brilliant Red K-2bp by Cetyltrimethylammonium Chloride-Modified Bentonite with Polyacrylamide Flocculant

Modification of Three Types of Absorbents and Comparative Study on Their Dye Absorption Capability

Treatment of Dye Wastewater by Bentonite Adsorption and Catalysis

Impacts of Coagulant on a Chemically Enhanced MBR Applied for Advanced Treatment of Dyeing Wastewater

Mechanism of Adsorption of Anionic Dye from Aqueous Solutions Onto Organobentonite.

Cationic surfactant modified iron nanoparticles for removal of orange II in batch mode: Kinetics, isotherms, mechanistic, and thermodynamic approach

Adsorption of Orange Ii Dye from Aqueous Solutions Using Phosphoric-Acid Modified Clam Shell Powder

Enhanced Effect of Cetyl Pyridinium Chloride in Bentonites Treatment of Waste Water Containing P-Nitrophenol

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

Enhanced Organic Contaminant Retardation by CTMAB-Modified Bentonite Backfill in Cut-Off Walls: Laboratory Test and Numerical Investigation

Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye

High Performance Adsorption of Orange II Dye Onto Modified Mussel Shell Powder

Effects Of Bentonite Activation Methods On Chitosan Loading Capacity

Preparation of Quaternary Ammonium Salt-Modified Chitosan Microspheres and Their Application in Dyeing Wastewater Treatment

Catalytic Degradation of Orange II by UV-Fenton with Hydroxyl-Fe-pillared Bentonite in Water

Cetyltrimethylammonium Bromide-Modified Laponite@Diatomite Composites for Enhanced Adsorption Performance of Organic Pollutants

Sorption and Mechanism of Surfactants on Bentonite in Combined Pollution