Abstract:Model spent cetyltrimethylammonium bromide (CTMAB)-bentonite, and cetyl pyridinium chloride (CPC)-bentonite used for sorbing p-nitrophenol (PNP) from wastewater, as well as virgin CTMAB-bentonite and CPC-bentonite, were employed as the starting materials to prepare porous clay heterostructures (PCHs). The BET surface areas and total pore volumes of the PCHs based on these spent and virgin organobentonites (PNP-CTMAB-PCH, CTMAB-PCH, PNP-CPC-PCH and CPC-PCH) are 661.5 m2/g and 0.25 cm3/g, 690.4 m2/g and 0.27 cm3/g, 506.3 m2/g and 0.30 cm3/g, and 525.4 m2/g and 0.30 cm3/g, respectively. These values approximate those of activated carbon (AC), at 731.4 m2/g and 0.23 cm3/g, and are much larger than those of bentonite and CTMAB-bentonite, at 60.9 m2/g and 0.12 cm3/g, and 3.7 m2/g and 0.0055 m2/g, respectively. The PCHs have slightly higher adsorption capacities for benzene and CC14 than AC at higher relative pressures despite their comparatively lower benzene and CC14 adsorption capacity at lower relative pressures. The existence of PNP in organobentonites also enhances the volatile organic compounds (VOCs) adsorption capacity of PCHs at lower adsorbate concentrations, although some adsorption capacity is lost at higher concentrations. The hydrophobicity order of the adsorbents is: CTMAB-bentonite > AC > PCHs > bentonite. The micro- to mesoporous pore sizes, superior VOC adsorption properties, thermal stability to 750°C and hydrophobicity and negligible influences of PNP on PCHs make spent PNP-containing organobentonites ideal starting materials for synthesis of PCHs and especially attractive adsorbents for VOC sorption control.

Enhanced Effect of Cetyl Pyridinium Chloride in Bentonites Treatment of Waste Water Containing P-Nitrophenol

Effects of Cation Adsorption on Properties of Silt Clay and Mixed Dredged Soil

Enhanced Soil Retention for O-Nitroaniline by the Addition of a Mixture of a Cationic Surfactant (cetyl Pyridinium Chloride) and a Nonionic Surfactant (polyethylene Glycol Mono-4-nonylphenyl Ether).

Phenol adsorption properties and microstructural changes of organically modified bentonite

Organobentonites as adsorbents for some organic pollutants and its application in wastewater treatment

Enhanced Organic Contaminant Retardation by CTMAB-Modified Bentonite Backfill in Cut-Off Walls: Laboratory Test and Numerical Investigation

Adsorption of Volatile Organic Compounds Onto Porous Clay Heterostructures Based on Spent Organobentonites

[Effects of Pb(NO3)2 and Cetylpyridinium Chloride on Sorption of P-Nitrophenol by Sediment].

Effect of a Mixed Anionic-Nonionic Surfactant Adsorption on Bentonite Structure and on Distribution of Pentachlorophenol

Organobentonite combined by microwave and its sorption properties of organism in water

Pentachlorophenol Sorption in the Cetyltrimethylammonium Bromide/Bentonite One-Step Process in Single and Multiple Solute Systems

Simultaneous Sorption of Aqueous Phenanthrene and Phosphate Onto Bentonites Modified with AlCl3 and CTMAB

Sorption and Mechanism of Surfactants on Bentonite in Combined Pollution

The Performance of the HDTMA-AET Modified Bentonite As a Sorbent for Cd and P-nitrophenol

Bisphenol A Adsorption and Transport in Loess and Cationic Surfactant/hydrophilic Polymer Modified Bentonite Liners.

Treating Dye Wastewater of Reactive Brilliant Red K-2bp by Cetyltrimethylammonium Chloride-Modified Bentonite with Polyacrylamide Flocculant

Dually organic modified bentonite with enhanced adsorption and desorption of tetracycline and ciprofloxacine

Sorption Properties and Mechanisms of P-Nitrophenol to Anion-Cation Organobentonites from Water

Removal of phenols from water accompanied with synthesis of organobentonite in one-step process.

A new method for the preparation of modified bentonite used in organic wastewater treatment

Enhancement Effect of Ctab in Dye Wastewater Treatment by Bentonite