Abstract:Magnetic bentonite is modified by an amphoteric surfactant (dodecyl dimethyl betaine, BS-12), then modified by a cationic surfactant ( Cetyl Trimethyl Ammonium Bromide, CTMAB) and anionic surfactant ( Sodium lauryl sulfonate, SDS). Amphoteric-cationic modified magnetic bentonite ( BS-CT-MBT) and amphoteric-anionic modified magnetic bentonite ( BS-SDS-MBT) are obtained. Structural identification of the samples were characterized by scanning electron microscopy ( SEM), X-ray diffraction (XRD), thermogravimetric analyses (TG), Fourier transform infrared spectra (FTIR), and vibrating sample magnetometer (VSM). The carbon-nitrogen content, specific surface area, and pore volume were also evaluated. Batch isotherm studies were conducted to evaluate the sorption of phenol. The results show that BS-CT-MBT and BS-SDS-MBT can be separated by magnetic separation. The carbon content-nitrogen content and content of surfactants of the BS-CT-MBT increase, while surface area and pore volume decrease compared to those of BS-MBT. Compared with BS-MBT, the carbon-nitrogen content, content of surfactants, and pore volume of BS-SDS-MBT are decreasing and surface area is increasing. The desorption rate of the surfactants is less than 9% at pH 6. 0 and in 0. 1 mol·L - 1 NaCl solution. The Henry equation is the optimal description for the phenol sorption isotherms, implying a partitioning sorption process. The amount of phenol sorption follows the order: BS-CT-MBT > BS-MBT > BS-SDS-MBT > BT > MBT, which significantly correlates with the variation of the content of surfactant. Amphoteric magnetic bentonites modified by CTMAB have better absorption performance for phenol than those modified by SDS.

The Performance of the HDTMA-AET Modified Bentonite As a Sorbent for Cd and P-nitrophenol

Correlation of Structure and Sorption Behavior of Modified Bentonite

Simultaneous adsorption of organic pollutant and heavy metal onto surfactant-modified organobentonites with chelating ligands

Phenol adsorption properties and microstructural changes of organically modified bentonite

Preparation And Simultaneous Sorption Of Ctmab-Htcc Bentonite Towards Phenol And Cd(Ii)

Adsorption of Pb (II) from Aqueous Solution by Modified Bentonite

Characterization and adsorption performance of phenol on amphoteric modified magnetic bentonites

Enhanced Organic Contaminant Retardation by CTMAB-Modified Bentonite Backfill in Cut-Off Walls: Laboratory Test and Numerical Investigation

Adsorption Behavior of PAEs on Loess–HTMAC Bentonite and Its Effects on the Performance of Cut-Off Walls

Enhanced removal of Cd (II) from aqueous solution by EDTA functionalized three-dimensional magnetic nitrogen-doped porous carbon

Adsorption of Phenol on Amphoteric-Cationic Modified Bentonites

Equilibrium, kinetic and thermodynamic studies of adsorption of Cd(II) from aqueous solution onto HACC-bentonite

Secondary Modification Mechanisms of BS-12 Modified Bentonite with DTAB and Phenanthrene Adsorption by Combinedly Modified Bentonite

Organic Modification of Bentonite and Its Application for Perrhenate (an Analogue of Pertechnetate) Removal from Aqueous Solution

Simultaneous Sorption of Aqueous Phenanthrene and Phosphate Onto Bentonites Modified with AlCl3 and CTMAB

Preparation of Humic Acid-Bentonite Polymer Composite: A Heavy Metal Ion Adsorbent

Comparative assessment of modified bentonites as retardation barrier: adsorption performance and characterization

Enhanced Effect of Cetyl Pyridinium Chloride in Bentonites Treatment of Waste Water Containing P-Nitrophenol

Comparison of Amphoteric-Cationic and Amphoteric-Anionic Modified Magnetic Bentonites: Characterization and Sorption Capacity of Phenol

Preparation of Humic Acid-Bentonite-Polymer Composite and Investigation of Its Efficiency for the Removal of Nickel, Cadmium and Lead Ions from Wastewater

Design and Preparation of Magnetic CTAB/Montmorillonite Nanocomposite for Phenols Removal