Abstract:Polymer-modified bentonite is widely utilized in wastewater treatments and barrier projects for contaminants due to its excellent performance. Despite numerous studies being conducted on the properties of different types of polymer-modified bentonite, the impact of synthetic processes has not been systematically explored. Hence, two common processes, the wet process and the semi-dry process, were investigated and compared. Sodium carboxymethyl cellulose (CMC)-modified bentonite was selected as an example here. Response surface methodology (RSM) was employed to develop relationship models of various factors versus the swell index. Specifically, the influence of modification temperature and stirring duration in the wet process, as well as pressure, moisture content, and ageing time in the semi-dry process were investigated. The feasibility and accuracy of the models were verified by the analysis of variance (ANOVA) and hypothesis testing. Results indicate that the semi-dry process leads to greater expansibility than the wet process. CMC dosage is a critical factor affecting performance. The following recommendations were made for the practical production: for the wet process, long-duration stirring at high temperature should be avoided at low CMC dosage, while the opposite is true at high CMC dosage (> 10%); for the semi-dry process, a longer ageing period should be selected at higher polymer contents, which can obviously improve the performance. Microscopic experiments were conducted to compare the differences in the modification mechanism of the two processes. Polymer/bentonite composites mainly form co-existing exfoliated and intercalated structures in wet and semi-dry processes, and the latter has a higher degree of exfoliation. The intensity of cationic bridging, hydrogen bonding, and group interaction between the polymer and bentonite is stronger when adopting the semi-dry process, resulting in better modification effects.

Recycling Paper Mill Sludge with Modified Bentonite

Effect of Adding Alum Sludge from Water Treatment Plant on Sewage Sludge Dewatering

Feasibility study of the paper sludge properties in manufacturing recycled filler

Preparation of Pulp Refining Additive from Paper Sludge Through Organic Modification

TREATMENT OF WASTEWATER FROM WHITE CARD PAPER PRODUCTION WITH INCLINED SCREEN-FLOCCULATION SEDIMENTATION-A/O PROCESS

Effects of a New Synthetic Fe-PAM Flocculants on Filtration and Consolidation of Bentonite Slurry

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Preparation of Sodium Carboxymethyl Cellulose from Paper Sludge

Treatment of Papermaking Mill Wastewater

Modified Corn-Core Powder for Enhancing Sludge Dewaterability: Synthesis, Characterization and Sludge Dewatering Performance

Synthesis of an Eco-friendly Bamboo Cellulose-grafted-ployacrylamide Flocculant and Its Flocculation Performance on Papermaking Wastewater

Research on the Technique of Reclaiming Calcium Carbonate and Fibers from the Sludge of Whitewater

Sustainable valorization of paper mill sludge into cellulose nanofibrils and cellulose nanopaper

Effects of paper mill residual additives on sintering and melting characteristic of wheat straw

Influences of Bentonite Modification Methods on the Physical and Chemical Properties of Bentonite

Enhancing anaerobic digestion of actual papermaking wastewater with addition of Fenton sludge

Research on coating modification and application of papermaking Fenton sludge

Treating Dye Wastewater of Reactive Brilliant Red K-2bp by Cetyltrimethylammonium Chloride-Modified Bentonite with Polyacrylamide Flocculant

Preparation of biochar from anaerobic digested sludge for enhancement of sludge dewatering

Thermal-alkaline Pretreatment of Polyacrylamide Flocculated Waste Activated Sludge: Process Optimization and Effects on Anaerobic Digestion and Polyacrylamide Degradation.

Effects of Synthetic Processes on the Swelling Capacity and Modification Mechanism of CMC-modified Bentonite Composites