Abstract:Ethylbenzene catalytic dehydrogenation can generate a large amount of hydrogen. Its vent gas is attractive with hydrogen content higher than 75 mol%. Nevertheless, styrene remaining in the vent gas is highly active to polymerize into oligomers, the gradual accumulation of which is harmful to hydrogen separation equipments. In this work, an integral separation process including absorption and membrane units is established to overcome this challenge. Absorption unit running with fresh ethylbenzene as the absorbent is proposed to deeply remove styrene, the residual content of which is reduced to less than 10 ppm. Thereafter, the generation and accumulation of styrene oligomers is restrained strictly to protect hydrogen separation equipments. Furthermore, the custom-designed absorption tower with a multi-stage cycle structure is used to reasonably improve styrene content in the used ethylbenzene at tower bottom, in the interest of reducing styrene recovery expense. For a 100 kt/a styrene plant with the vent gas flow rate up to 3180 N m(3)/h, a 5 stage tower is designed, which is 0.5 m in diameter, 5.0 m in height, and about 3.0 m in the total packing height of 25-mm metal Intalox saddles. Flow rates of liquids in the tower and the recycle routes are 1.19 m(3)/h and 1.05 m(3)/h, respectively. Finally, compressor and membrane for hydrogen recovery are optimized simultaneously with gross profit as the criterion. For compressor, its duty and outlet pressure are 520 kW and 1.85 MPa, respectively. For membrane separation unit, its area and permeation stage cut are 460 m(2) and 0.84, respectively. According to the simulation research, this integrated system can behave excellently with an annual recovery of 162 ton styrene, 281 ton aromatic hydrocarbons and 2.1 x 10(7) N m(3) hydrogen, with a gross profit up to 5.1 x 10(6) US dollars per year. (C) 2016 Elsevier B.V. All rights reserved.

Simulation of ethyl-benzene dehydrogenation process in a monolithic reactor

Simulation of multi-fluidized-bed in series for methanol to olefins

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

CFD simulation of the ethylbenzene dehydrogenation reaction in the fixed bed reactor with a cylindrical catalyst of various sizes

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Modeling and Simulation of the Hydrogenation of α-Methylstyrene on Catalytically Active Metal Foams as Tubular Reactor Packing

An Analysis of Fixed-Bed Catalytic Reactors Performances for One-Stage Butadiene Synthesis from Ethanol

Process simulation of methanol production via carbon dioxide hydrogenation

CFD Simulation of Methanol Dehydration Step through an Adiabatic Fixed-bed Reactor of DME Synthesis

Aerobic Oxidation of Styrene in Functional Reactors and Computational Fluid Dynamics Simulation

CFD Simulation and Optimization of Adiabatic Reaction Process of C-2 Hydrogenation

Multiscale Modeling and Simulation on Oxidative Dehydrogenation of Ethane to Ethylene

Numerical Modeling of Chemical Looping Oxidative Dehydrogenation of Ethane in Parallel Packed Beds

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Stacked Catalytic Membrane Microreactor for Nitrobenzene Hydrogenation

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Interpreting Nonoxidative Ethane Dehydrogenation in an Open Tube Reactor

Effective Reclamation of Vent Gas in Ethylbenzene Dehydrogenation by Coupling Multi-Stage Circle Absorption and Membrane Units

Pyrolysis Gasoline Hydrogenation in the Second-Stage Reactor: Reaction Kinetics and Reactor Simulation