Abstract:The present study assesses, using a theoretical approach, the performances of two widely used fixed-bed reactors for the ethanol-to-butadiene (ETB) one-stage (Lebedev) process: multibed adiabatic reactors (MBAR) with inter-bed heating and a multitubular reactor (MTR). The mathematical model consists of mass and heat conservation equations at catalyst particle and particle bed scales, coupled with a published kinetic model specific for a modified MgO–SiO2 catalyst. The process simulations at the level of catalyst particle have shown that the inter-phase concentration and temperature gradients are negligible, the only physical step with a limiting influence on process kinetics being the internal diffusion. A simplified version of the reactor model was also formulated, including empirical expressions developed in the study for the calculation of internal effectiveness factors. The reactor simulations highlighted that the MBAR with inter-bed heating by injection of hot reactants provides worse butadiene (BD) yields as a consequence of reduced reaction times (due to reactant by-pass of catalyst beds). The MBAR with inter-bed heating using heat exchangers provides better performances but inferior to those of MTR if the number of catalyst beds is less than six. A preliminary optimization study for the MBAR and MTR is also presented. The results showed that the maximization of BD yield has the drawback of a low BD production rate, whereas the maximization of BD production rate corresponds to a relatively low BD yield and high ethanol and inert recycles. A trade-off between the two extreme cases can be attained by maximizing the income generated by reactor operation.

An Analysis of Fixed-Bed Catalytic Reactors Performances for One-Stage Butadiene Synthesis from Ethanol

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Highly Active and Selective Zr/MCF Catalyst for Production of 1,3-Butadiene from Ethanol in a Dual Fixed Bed Reactor System

Studies on the Binary MgO/SiO2 Mixed Oxide Catalysts for the Conversion of Ethanol to 1,3-Butadiene

A Kinetic Study on Ethanol Coupling with Acetaldehyde to 1, 3‐Butadiene over Zr‐β Zeolite: Insight into Deactivation

Dehydration of 2,3-Butanediol to 1,3-Butadiene and Methyl Ethyl Ketone: Modeling, Numerical Analysis and Validation Using Pilot-Scale Reactor Data

Ethylene and cyclohexane co-production in the fixed-bed catalytic membrane reactor: Experimental study and modeling optimization

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis

The Model of Catalytic Reactor of Ethylene Glycol Production

A Computationally Efficient Multi-Scale Simulation of a Multi-Stage Fixed-Bed Reactor for Methanol to Propylene Reactions

Study on direct alcohol/ether fuel synthesis process in bubble column slurry reactor

The Simulation of an Industrial Fixed Bed Reactor for Methanol Dehydration to Dimethyl Ether

Modelling and simulation of multicomponent acetone-butanol-ethanol distillation process in a sieve tray column

Kinetic, Thermodynamic, and Parametric Studies on Batch Synthesis of 1,1‐Diethoxybutane Catalyzed by Amberlyst‐15 Wet

Modeling and simulation of biodiesel synthesis in fixed bed and packed bed membrane reactors using heterogeneous catalyst: a comparative study

Mathematical Modeling of the Competitive Sorption Dynamics of Acetone–butanol–ethanol on KA-I Resin in a Fixed-Bed Column

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Catalytic Conversion of Ethanol with Conventional and Ohmic Heating in Comparison

Process simulation based on experimental investigations for 3-methylthiophene alkylation with isobutylene in a reactive distillation column