Abstract:Open-cell metallic foams used as catalyst supports exhibit excellent transport properties. In this work, a unique application of metallic foam, as pelletized catalyst in a packed bed reactor, is examined. By using a wall-segment Computational Fluid Dynamics (CFD) setup, parametric analyses are carried out to investigate the influence of foam morphologies (cell size ϕ=0.45−3 mm and porosity ε=0.55−0.95) and intrinsic conductivity on flow and heat transport characteristics in a slender packed bed (N=D/dp=6.78) made of cylindrical metallic foam pellets. The transport processes have been modeled using an extended version of conventional particle-resolved CFD, i.e., flow and energy in inter-particle spaces are fully resolved, whereas the porous-media model is used for the effective transport processes inside highly-porous foam pellets. Simulation inputs include the processing parameters relevant to Steam Methane Reforming (SMR), analyzed for low (Rep~100) and high (Rep~5000) flow regimes. The effect of foam morphologies on packed beds has shown that the desired requirements contradict each other, i.e., an increase in cell size and porosity favors the reduction in pressure drop, but, it reduces the heat transfer efficiency. A design study is also conducted to find the optimum foam morphology of a cylindrical foam pellet at a higher Rep~5000, which yields ϕ = 0.45, ε = 0.8. Suitable correlations to predict the friction factor and the overall heat transfer coefficient in a foam-packed bed have been presented, which consider the effect of different foam morphologies over a range of particle Reynolds number, 100≤Rep≤5000.

Modeling and Simulation of the Hydrogenation of α-Methylstyrene on Catalytically Active Metal Foams as Tubular Reactor Packing

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

CFD Modeling of Styrene Polymerization in a CSTR

Numerical Investigation of Methane Steam Reforming in the Packed Bed Installed with the Fin-Metal Foam

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Numerical Simulation of Heat and Mass Transfer in an Open-Cell Foam Catalyst on Example of the Acetylene Hydrogenation Reaction

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Simulation of catalytic reactions in open-cell foam structures

External Mass Transfer Performance Studies in a Micropacked Bed Reactor with Pd/PDA/Nickel Foam

Investigation of External Mass Transfer in a Micropacked Bed Reactor with a Pd/Al2O3/Nickel Foam

Mathematical Modeling of De-Hydrogenation Micro-Reactors for Vehicles Using the Liquid Carrier of Hydrogen Fuel

Investigation of Hydrogenation and Mass Transfer Performance in Micropacked Beds with Highly Active Monolithic Catalysts

Development of Cylindrical Laminated Methanol Steam Reforming Microreactor with Cascading Metal Foams As Catalyst Support

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

A Cfd Simulation Study to Evaluate the Flow and Catalytic Hydrogenation of Dimethyl Oxalate in A Packed Bed, A Two-Stage Fluidized Bed, and A Circulating Fluidized Bed

Modeling of a Slurry Bubble Column Reactor for Fischer-Tropsch Synthesis

Iterative Multiscale Computational Fluid Dynamics-Single-Particle Model For Intraparticle Transfer And Catalytic Hydrogenation Reaction Of Dimethyl Oxalate In A Fluidized-Bed Reactor

Thermochemical Analysis of a Packed-Bed Reactor Using Finite Elements with FlexPDE and COMSOL Multiphysics