Abstract:Catalysts are gradually deactivated in a reactor given the deposition of carbon and metals in pore channels, thereby resulting in increased density. To ensure a continuous and stable operation, a certain amount of catalysts is discharged in increments, whereas several fresh catalysts are added to retain the activity of the previous catalysts in the equipment. The discharged catalysts are a mixture of catalysts with various activities and this discharge wastes resources, thus leading to potential environmental hazards and causing difficulties in waste treatment, so they need comprehensive disposal for resourceful recovery and harmless treatment. According to theory of air acceleration classification, calculation was made with the Fluent software and EDEM software, based on the standard k-ε turbulence model and the Eulerian model. The coupled CFD-EDM simulation of fluidized-bed catalyst separation was performed to analyze the state of particle and column. The statistics of particle in the classification column obtained from simulations can help to study further of classification mechanism and particle movement in column. Different active catalysts obtained different acceleration behaviors because of different densities, and the acceleration is lower in lowly active catalysts than in highly active catalysts. Therefore, the positive velocity is lower and the negative velocity is higher in lowly active particles than in highly active particles. So highly active catalysts raised with air to the discharge outlet at the top of the separation column, while the lowly active catalysts gradually dropped to the discharge outlet at the bottom of the separation column. Under the conditions, the fluid field and particle state all expressed periodic changing and the fluidized-bed catalysts of 50% and 100% activities achieved separated after 9 cycles in column. This study also conducted the experiments on the discharged fluidized-bed catalysts and efficiency of air acceleration classification generally increased then declined with the increase in air velocity, and peaked at the optimal separation efficiency rate of 89%. The results showed that catalysts in larger activity difference were easier to classified. The simulation results are consistent with the experimental results, which verifying the feasibility of airflow acceleration classification applied in catalyst activity classification.

CFD simulation of the ethylbenzene dehydrogenation reaction in the fixed bed reactor with a cylindrical catalyst of various sizes

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Simulation of ethyl-benzene dehydrogenation process in a monolithic reactor

Acetylene Hydrogenation Processes Studied Using CFD in a Packed Bed Reactor

CFD-DEM coupling simulation of fixed bed reactor with small diameter ratio

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Kinetic study on ethylbenzene dehydrogenation reaction with low water-to-hydrocarbon ratio catalyst and industrial application

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

CFD Modeling Using Heterogeneous Reaction Kinetics for Catalytic Dehydrogenation Syngas Reactions in a Fixed-Bed Reactor

Experimental study on porous membrane reactor for dehydrogenation of ethylbenzene

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach

Numerical calculation of flow and reaction safety with different particle sizes in a fixed bed reactor for propene epoxidation with H 2 and O 2

Experimental Investigation on Product and Temperature Distribution in a Continuous Flow Packed-Bed Reactor for Dodecahydro-N-Ethylcarbazole Dehydrogenation

CFD Simulation and Optimization of Adiabatic Reaction Process of C-2 Hydrogenation

Adsorption and Diffusion Properties of Ethylene, Benzene and Ethylbenzene in the Cylindrical Pore under Alkylation Reaction Near Critical Regions by Dcv-Gcmd Simulation

Numerical Modeling of Chemical Looping Oxidative Dehydrogenation of Ethane in Parallel Packed Beds

CFD-EDM Simulation of Discharged Catalyst by Acceleration Air Classification

Multiscale Modeling and Simulation on Oxidative Dehydrogenation of Ethane to Ethylene

A conjugated heat and mass transfer model to implement reaction in particle-resolved CFD simulations of catalytic fixed bed reactors